110V Leak-proof AB Two-component Dispensing Valve Electric Stirring Mixing Valve for Sale

Recent Threads

On eBay Now...

110V Leak-proof AB Two-component Dispensing Valve Electric Stirring Mixing Valve For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

110V Leak-proof AB Two-component Dispensing Valve Electric Stirring Mixing Valve:
$534.86

Electric Anti-drip Mixing Valve AB Double Liquid Dispensing Valve 110V 110V Leak-proof AB Two-component Dispensing Valve Electric Stirring Mixing Valve PreAsion® Product Overview The electric dispensing valve is a professional device for uniform mixing of double liquids and efficient, accurate dispensing. It uses high-quality materials for exquisite structure and long service life. Its anti-drip design ensures precise operation and avoids environmental pollution. The valve saves time/labor, reduces material loss, and improves dispensing efficiency. It is widely applied in electronic packaging, precision adhesion, new energy manufacturing, medical equipment, and automotive electronics. Product Parameters ModelQLH-105F VoltageAC110V/60Hz TypeDouble-acting air cylinder backward suction Air cylinderDouble-acting air cylinder Main materialStainless steel + POM + aluminum alloy anodizing Operation viscosity1-1,000,000cps Minimum output amount0.01ml Feeding pressure<300kg Size of feeding inlet1/8’’npt(f) Operating speed<600/min Output pressure adjusting range0-0.06mpa Product size44*15*18cm (17.3*5.9*7.1 inches) Net weight3.2kg (7.1LBS) Product Features & Advantages Uniform dispensing, no drip leakage, high operation controllability, and reduced material waste. Real-time sufficient mixing of double liquids, excellent stirring effect, and high mixing uniformity. Dual-channel independent control, high mixing precision/stability, and adaptability to multiple proportions. High-quality motor for stable operation, provides reliable driving force, and ensures long service life. Quick and convenient dispensing speed adjustment, simple connection, and easy operation. Excellent fixing and supporting effect, high reliability/practicability, and firm durability.

1. The dispensing valve is crafted with high-quality stainless steel and aluminum alloy, processed by precision CNC lathe. It features exquisite structure, high precision, wear/corrosion resistance, and long service life.

2. Precise dispensing operation with quick backward suction response, uniform glue discharge, no dripping, and no glue drawing.

3. Driven by air compression with fluid sealing structure, reducing seal replacement needs. Ensures efficient work, cost savings, loss reduction, and convenient maintenance.

Operation Method A. Preparation before operation

Read the instruction manual carefully before operation.
Check valve appearance for dampness; dry if needed. Address any faults before use.
Confirm medium flow direction and check valve opening/closing signs.
For valves idle ≥3 months: Check clutch (handle in manual position), motor insulation, steering, and circuits before starting.

B. Starting and Running

Connect external power, turn on switch; indicator light will activate.
Local control: Set switch to RUN position (motor rotates). Adjust speed via SPEED CONTROL knob.
Press \"on\"/\"off\" button to start valve; it stops automatically when fully opened/closed.
Adjust discharge volume to desired setting (minimum 0.01ml) based on needs.

C. Operation Completion

Reset: Set speed knob to minimum (if applicable), timer to \"zero\" (if applicable), turn off switch, and disconnect power.
Cleaning: Wipe mixing rod thoroughly; no water droplets or dirt residue allowed.

Attention

Monitor valve opening/closing indicators and stem operation on-site. Ensure opening/closing degree meets requirements. Stop and inspect for wrong indicators or abnormal noises.
For first use after stroke/over-torque controller setup: Monitor stroke control. Stop manually if valve doesn’t stop at full open/close position.
On-site full closing: Stop electric closing before full in-place; use micro-motion to finalize closing.
Turn off valve power after successful operation.
Special operation:
- Multi-valve operation: Follow production sequence requirements.
- Ball/gate/globe/butterfly valves: Only full open/close; prohibited for regulation.
Maintenance safety: Disconnect valve power before cleaning or inspection.

Item Number (057189): 1 x Electric Anti-drip Dispensing Valve 110V

Purchase Assurance

You can order with confidence. Contact us for any concerns; we reply within 24 hours (normal conditions).

Handling Time: Shipping within 1-3 business days after payment clearance (processed Mon-Fri; excluding weekends/public holidays).

Warranty: 6 months for the machine (not consumables). We provide post-warranty service/technical support at low cost.

Shipping & Handling Details Default Shipping Free/standard shipping applies to Canada/lower 48 US (via Canada Post, USPS, UPS Ground). Contact us for other regions or shipping methods. Extra Shipping Costs Additional fees for Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO, or other countries. Contact us for details. Address Validity Ensure address supports UPS/USPS. Buyer bears costs from incorrect/undeliverable addresses. Damage in Shipping Contact us first; we resolve issues via fastest method. Return & Refund Contact us for dissatisfaction; do not open requests/cases without notice (affects future service discounts). Returns & Exchanges

Returns accepted within 14 days of delivery; items must be new/unused with original materials.
Partial refund for opened/damaged items (based on condition).
Buyer’s remorse returns: Buyer covers return shipping; original shipping deducted from refund

On Oct 31, 2025 at 19:56:16 PDT, seller added the following information: