VFD Variable Frequency Drive 2.2KW 3HP Inverter Convert 1 To 3 Phase VFD 220V for Sale

Recent Threads

On eBay Now...

VFD Variable Frequency Drive 2.2KW 3HP Inverter Convert 1 To 3 Phase VFD 220V For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

VFD Variable Frequency Drive 2.2KW 3HP Inverter Convert 1 To 3 Phase VFD 220V:
$95.00

Rated ParametersMODELNominal Capacity (KVA)Input Current(A)Output Current (A)Applicable Motor Output (KW)Applicable Motor Output (HP)Overall Dimension（MM）Installation Descriptions SpecificationsINPUTInput Voltage AC,1 to 3 Phase,220V(-15%) ~ 240V(+10%)ated Frequency50/60 HzFrequency Range ± 5% (47.5 ~ 63Hz)OUTPUTOutput Voltage 0- Input VoltageMaximum Output Frequency0.1 ~ 500HZOutput PowerPlease refer to Rated Parameter tableOutput Current Please refer to Rated Parameter tableBASIC PARAMETERSHighest frequencyVector control: 0～500HzV/F control：0～500HzCarrier frequency0.8KHz~8KHz(Support up to 16KHz carrier frequency)Adjusted automatically according to the load characteristicsInput frequency resolutionDigital setting: 0.01HzAnalog setting: Highest frequency× 0.025%Control modeOpen-loop vector control (SVC)V/F controlStarting torque 0.5Hz/150% (SVC)Adjustable speed ratio1：100 (SVC)Speed control accuracy± 0.5% (SVC)Overload capability 150% of rated current: 60 seconds170% of rated current: 12 seconds190% of rated current: 1.5 secondsTorque boostAuto torque boost; Range of manual torque boost 0.1%~30.0%V/F curveThree types: Linear, Multi-point, square curve (1.2 power, 1.4 power, 1.6 power, 1.8 power, 2 power)V/F separation Full separation, Half separationAcceleration and deceleration timeLinear and S-curve acceleration and deceleration modes available. The range of acceleration and deceleration time is 0.0~6500.0s.DC brakingDC braking frequency: 0.00Hz ~ Maximum frequencyBraking time: 0.0s~36.0sBraking current value: 0.0%~100.0%JOG control JOG frequency range: 0.00Hz ~ Maximum frequency (5Hz in default).JOG acceleration and deceleration time: 0.0s~6500.0s.Built-in PID Simplify the establishment of a closed-loop control systemAutomatic voltage regulation (AVR)Keep the output voltage in stable when the grid voltage fluctuates.Stall prevention from overvoltage and overcurrentThe current and voltage are limited automatically during operation to prevent frequent tripping due to over-current and over-voltage.Rapid current limitReduce the risk of over-current faults to keep VFD operated normally.Torque limit and controlLimit the torque automatically during operation to prevent frequent tripping due to over-current.Braking unitBuilt-in braking unit for 18.5KW and below modelsSPECIAL FEATURESDeceleration to stopIn case of power loss, the energy from load response is used to compensate and decelerate the motor until standstill, to prevent mechanical damage.Rapid current limitReduce the risk of over-current faults to keep VFD operated normally.Timer controlSetting range: 0.0Min ~ 6500.0MinCommunication ModbusINPUT & OUTPUTCommand source Operation panel, control terminal and serial communication port.Frequency sourceDigital setting, Analog voltage setting, Analog current setting, Pulse setting and Serial port setting.Auxiliary frequency source5 options to provide flexible auxiliary frequency fine-tuning and frequency synthesis.Input terminals4 digital input terminals, one of which supports high-frequency pulse input up to 50kHzOutput terminals1 analog input terminal supporting 0 ~ 10V voltage input or 0 ~ 20mA current inputDISPLAY BUTTONSLED displayDisplay parametersKey lock and function selectionIt allows users to partially or fully lock the keys or define operated range for partial keys to prevent misoperationProtective functionMotor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc.ENVIRONMENTStorage temperature -20°C ~ 60°COperation temperature-10°C ~ 50°C (If temperarture is higher than 40°C, the output capacity will be derated 1% per 1°C increase)Storage humidity＜90%RHOperation humidity＜90%RHNoise Level 50dBA max.OTHERSEMCStandards:IEC 61800-3, C3SafetyStandards:IEC 61800-5-1INTERACECommunication PortRS-485