When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The Triton LED Series is an indoor or outdoor, die-cast, architectural, high-performance LED fixture designed to work in emergency lighting and combined general/emergency lighting applications.
Key FeaturesConstructionOur Triton LED Series offers a decorative, low-profile, architectural design with die-cast aluminum housing and durable powder coated finishes in silver and dark bronze. The Triton LED Series can be switched on and off by the integrated photocontrol or by a normally open switch while maintaining UL 924 compliance. The unit features a fully sealed and gasketed enclosure for Damp and Wet Location applications.
IlluminationUnits come standard with a single 11W high-performance LED featuring 1080 lumens in AC mode and 260 lumens in emergency backup mode, 5000K CCT and a CRI of 70. Features a UV-stable mirror-bright reflector and prismatic polycarbonate refractor for ideal light output.
InputDual-voltage input 120 or 277VAC @ 60Hz.
Nickel Cadmium Battery- NiCad (With Battery Only) Exitronix NiCad batteries are maintenance-free with a life expectancy of 15 years. NiCad batteries offer high-discharge rates and continue to perform in a vast temperature range from 0°C to 50°C (32°F to 122°F). Cold Location (CL) option temperature range is -20°C to 50°C (-4°F to 122°F)
EmergencyThe Triton LED will operate for a minimum of 90 minutes during a loss of power with a 24 hour maximum recharge time for the battery.
Low Voltage DisconnectLow Voltage Disconnect (LVD) measures the battery terminal voltage. The LVD continuously monitors the battery terminal voltage and if it should fall below a preset voltage threshold, the LVD will disconnect the load. When the battery is recharging and voltage is raised above another preset voltage threshold, the load is automatically reconnected.
Test ButtonThe test button is easy to locate and provides manual verification of the transfer circuit and emergency lamps.
InstallationUniversal J-box mounting pattern or surface wiring through the top conduit power feed make installation quick and easy.
Wet Location Rated (Standard)Wet Location Rated fixture that allows water or other liquids to drip, splash or flow on or against. The construction prevents the accumulation of water on live parts.
Guardian Self-Test/Self-DiagnosticsThe Guardian provides self-testing and self-diagnostic capabilities to the unit equipment. At predetermined intervals, the unit equipment will automatically switch into battery mode. The unit equipment will also perform various self-diagnostic tests of the unit. Visual signaling will alert maintenance personnel to a fault of the unit equipment electronics, emergency lamp(s), battery and/or battery charger. The circuitry continuously monitors the operating condition of the unit equipment and battery charging circuit/battery supply voltage. The unit equipment will automatically switch to battery mode every 28 days for a period of one minute. The unit equipment will automatically switch to battery mode every six months for a period of 30 minutes.
Conformance To Codes & StandardsThe Triton LED Series is UL Listed and meets or exceeds the following: UL 924, NEC requirements and NFPA 101.
EELP Triton Series DEM-BR-CW Emergency Fixture Indoor/Outdoor Battery Backup
$89.50
Exitronix Emergency Inddor/Outdoor Decorative Lighting Triton LED Series
$54.41
Exitronix TRL-ACEM-WH General Lighting or Combined General & Emergency Lighting
$89.95
Popular Tutorials
Alarms and Indicator Circuit diagrams