Plug and Play 4S 120A 12v - 14.6v LiFePO4 BMS Battery Balance No Soldering 12.8v for Sale

Recent Threads

On eBay Now...

Plug and Play 4S 120A 12v - 14.6v LiFePO4 BMS Battery Balance No Soldering 12.8v For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Plug and Play 4S 120A 12v - 14.6v LiFePO4 BMS Battery Balance No Soldering 12.8v:
$27.99

Note: This BMS is a custom model that comes pre assembled for easy install (no soldering needed) and is for LiFePO4, LiFe, or LFPbatteries.Lithium-ion (Li-ion)/Lithium-polymer (LiPo)based BMS boards are in my other listings.
Description:
This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff.We have pre installed a screw based connection block for the easy connection of balance wires to the BMS.The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 120A (burst).The following is the BMS parts list:
(1) BMS Board LiFePO4 LiFe LFP(2) Ring Terminal Connectors M3,8-16AWG WireCompatibility(2) Ring Terminal Screws and Washers(1) Pre-installed balance wire connection block,16-24AWG Wire Compatibility
*Wires are not included. Balance wires of 16-24AWG will fit in the balance connection terminal and primary wires of8-16AWG can be used in the ring connectors. Larger gauge primary wires can be used with larger ring connectors or solder points.Battery compatibility: Voltage of 2.4V - 3.7V LiFePO4 battery typesCharging input voltage: 12V - 14.6VMaximum starting current: 120AMaximumcontinuouscurrent: 60ACharge current: point): 100ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x LiFePO4 Battery Protection BoardCondition is New. Shipped with USPS First Class.