When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2022 New Upgraded FM155E-100V/200V Composite Multi-Welder
It can be used for a variety of applications such as semi-automatic welding (non-gas, gas and MIX gas combination)/handstick welding/TIG welding spool gun.MIG Function: Combination of non-gas/gas/MIX gas; TIG Function: Increases output current to upgrade the enhanced TIG welding control software. Weldable plate thickness is thicker than before and the arc starts more stable. When arc begins, large welding current will flow instantly and the arc starts smoothly.Equipped with inverter control and hot start features, the welding rod will not stick to when welding starts, and the welding rod is good to integrate.
The machine uses a full digital panel display to achieve concentrated adjustment of wire transfer speed and welding voltage. Welding parameters are easy to adjust.Thanks to digital control, the machine comes with synergy effect software that matches the wire diameter, material and current. It is an excellent choice for new welders and is easier for welding professionals. Additional voltage and inductance settings for professionals to find the exact welding performance of various projects.
1. Current display: shows preset current and actual welding current.
2. MIG Welding Torch Switch (Only effective for MIG 0.8 / MAG 0.8 / FLUX 1.0): The welder can only be operated by the spool gun torch in spool gun torch mode. MIG torch is only used for welding in MIG torch mode.Please check the status of the switch when using it.
3. This light will light up in stick mode
4. This light will light up in LIFTTIG mode
5.Voltage Minor Adjustment FunctionIf the output current does not change, the output voltage can be adjusted from -3V to +3V.Different individual habits and work can improve the welding effect
6. Mode Switch: Functions circulate between STICK, LIFT TIG, MIG 0.8, MAG 0.8, FLUX1.0 every click
7. Current adjustment functionOnly the current is adjusted, but this unit is a digital device.Parameters of current, voltage, and wire supply speed are matched.After adjusting the current, other parameters follow the conversion and matching.
8. OC Lights: If the welding load is overload and the output current of the machine is too big, the internal temperature of the machine is too high and the mechanical failure lamp will light up.This is normal.Machine can be recovered after heat dissipation is normal.Please restart the power supply.If broken, the malfunction lamp will light up.In this case, the machine is abnormal and maintenance is required.Please contact our supplier.
9. AC 110V: When the input voltage is 110V.
10.AC 220V: This light will light up when the input voltage is 220V.
11.MIG Welding Mode Shift Button: MIG 0.8, MAG 0.8, FLUX1.0
Holding and placement of torchAngle JointHold the torch so that the wire is approximately 1/4" (6.4mm) above the workpiece.The angle of the torch crosses with the workpiece is known as the working angle. In general, the torch needs to be divided into two workpieces of the angle.
Butt JointThe angle of the torch to its movement is known as the torch angle.The torch can be pulled or pressed according to many factors including personal preferences.
Everyday welding technologyTorch can be moved either straight (stringer beads) or small overlapping arc (weaving pattern).
Stringer and WeaveStringer is suitable for very thin materials that cannot steal too much heat.For thicker materials that require more heat, weaving is recommended.
Good heat dissipationAdvanced German cooling system, integrated overheating protection, and high performance cooling, you can expect better performance
Quality CertificationCertifications
We are a traditional company that integrates production, research, development and sales and has been deeply involved in welding for nearly a decade.Domestic and international foundation and professional certification.
Large CapacityHigh quality large capacity
The current output is more stable and will last longer
Upgraded version of igbt inverterThe welder uses IGBT technology at the tip to achieve 85% efficiency and 0.7 power ratio. Miniature welding equipment reduces the loss of copper and iron, is very energy saving, energy efficiency is noticeable, and the welding efficiency is greatly improved.
Details Determine QualityFull Copper Welded Torch InterfaceInstruction manual
Supports use of spool gunThe spool gun can weld aluminum. In order to meet the needs of more demands, we have added a spool gun interface. Customer response, our machine has excellent aluminum welding performance Spool Gun not included
Waterproof SwitchSafety first! Waterproof switch can protect your safety better.
36V Heated SocketIn cold weather, heating the gas regulator to maintain good working performance
SOLAR 2115 TOTE MIG WELDER USA 120V Used
$185.00
MIG 200A Dual Voltage 220/110v Gas/Gasless Welder Wire Feed MMA Welding Machine
$249.99
4800W Portable Electric Welder Handheld Welding Machine Kit with Digital Display
$99.20
Popular Tutorials
Alarms and Indicator Circuit diagrams