When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Available is a McQ OmniSense UnattendedGround Sensor System. This system is used by the US Customs and Border Patrol and other federal law enforcement agencies.
All components are new (with the exception of the CF30 laptop). I also have used components and can sell a system at a lower price point. Email me for details.
This unattended ground sensor system is complete and includes everything needed to secure your property or vunerable sites includingutilities, oil & gas and other critical infrastructures.
This sale includes 15 Sensors, called CORE units, with internal seismic and magnetic sensors. Additional CORE units are available along with passive infrared sensors and externalseismic sensors.
OmniSense COREsensors have a mix of transducers (Seismic, Acoustic, Magnetic, and PIR) TheCORE also has the capability to connect an external seismic transducer givingthe Operator more flexibility in sensor placement. The CORE units detecttargets and report the activity.
This sale Includes:
Panasonic CF-30 Laptop
TacSAD Operating System Software
Operations Manual
15 CORE Units - (3) CORES will come with external Passive Infrared Sensors
Base Station - Using RF system to receive/send messages to sensors connecting to TCP/IP network where it sends receives messages from the OmniSense Server.
15 - Bren-Tronics BB-2590 Batteries - Each Core unitwill hold 3 BB-2590 Batteries lasting up to 2 years before needing to berecharged - New BB-2590 batteries cost $250-350ea. Extra batteries can be included.
Antennas - Each CORE comes with anantenna
GPS Antennas - Each CORE comes with a GPSantenna
The CORE units are meant to be buried and are packaged in rugged unitsthat seal out dust and dirt, survive submersion in water up to three feet indepth, and operate over a temperature range of (-25 C) to (50 C). The COREsensors can be equipped with a variety of communications that operate overspread spectrum modems at 900 MHz. The communications architecture is highly flexible to fit mostoperational scenarios. The spread spectrum RF links provide line of sightconnectivity for ranges up to 10 kilometers when directive antennas are used,and up to 1 kilometer when omni directional antennas are used.
Target
Primary Transducer
Secondary Transducer
Personnel
Seismic
Seismic
Magnetic/PIR/Acoustic
Seismic
Magnetic/Acoustic/PIR
Table 1: Transducer Use
Table 2 lists the ideal transducerranges.
Personnel (meters)
Propeller Driven Aircraft (meters)
Seismic
25
50
25
50
Magnetic
10
25
1000
OmniSenseRemote Sensor System Background
The OmniSense Remote Intrusion Detection System haspioneered the path for very smart sensor systems. It is the first system tocombine information from multiple sensors to dramatically reduce false alarms.It is the first to fully network remote sensor systems so that databases,displays, and system control can be distributed to any point in the worldserved by a network. OmniSense is the latest state of the art in intrusiondetection systems with advanced sensor detection, communications and operatordisplay technology. The technology results in an extremely capable remotesensor system that is easy to use, can be flexibly reconfigured for a variety ofoperations, is portable and quickly setup, and is designed to be rugged forfield operations. The US Army has cited OmniSense as “One of the GreatestInventions of 2006.” OmniSense is a fully operational system deployed withgreat success in the current warfighting areas by the U.S. military. OmniSenseis also deployed by the U.S. military in other global areas for monitoringactivities in areas of interest. OmniSense has been selected by Boeing as theunattended ground sensor system for the SBInet border monitoring program. Inmany areas along our Southern and Northern borders unattended ground sensorsare needed because hilly or mountainous terrain, along with forests and foliageprevent tower mounted sensors from being able to “see” illegal crossingactivity. These unattended ground sensors also provide an invisible boundarythat either augments or supplants a physical fence to warn when illegal traffichas crossed the border into the United States.
McQ‟s OmniSense Remote IntrusionDetection System has very advanced features that make it the leading systemavailable. McQ has advanced its proven OmniSense product to provide a sensorsystem for border crossing detection, perimeter defense, force protection inhostile areas, pipeline and petroleum facility protection, criticalinfrastructure facility protection, denied area monitoring, and battlefielddetection of forces. McQ has pushed the state of the art in remote intrusiondetection systems for over fifteen years. This has resulted in very advancedsensor capabilities that can substantially improve the monitoring of activitiesin remote areas. McQ has incorporated technologies we have developed into theOmniSense system that address many remote area monitoring applications. Thissystem makes the task of monitoring remote areas both less people intensive andalso much more effective in detecting activities. The OmniSense Sensor Systemintegrates activity detection sensors and target imaging into an advancedsystem that provides Network and Internet connectivity with distributedSituation Awareness displays. The operator does not have to stare at displayscreens, which has never been an effective way to monitor activity. The systemprovides aural and visual alerts showing on a map where the activity isoccurring. These alerts can be automatically forwarded via Email, pagers, cellphones or specialized network interfaces to users.
Descriptionof the OmniSense CORE Sensor
TheOmniSense CORE Unit is designed for very low power consumption and hence, verylong life. The CORE Unit is also designed so that it can be used to cover largegeographic areas. The CORE Unit detects targets using Seismic, Acoustic,Magnetic, and Passive IR. The operator can choose which sensor combinationprovides the best detection capability and program the unit for its specificcapabilities. The CORE unit has an RF modem to send its detection informationdirectly or indirectly to the TNet Communication Architecture, which forwardsthe CORE information via a TCP/IP network to the Central computer/Server. Theterrestrial network also delivers command and control messages from the user tothe CORE units. The CORE Units have the seismic and magnetic sensors built intothe case to minimize external cabling for the operator when they are installed.The Passive IR (PIR) sensor and the Acoustic sensor are connected to the COREUnit case using external cables. The CORE also allows the monitoring of twoindependent switches and controls an output switch closure set of controls. TheCORE sensor provides a connector for an external geophone if the mission requiresone. These CORE sensors provide cost effective coverage for large geographic
Thisunit will not be shipped outside of the US due to US Arms Restrictions (ITAR).This unit will only be shipped to customers in the United States of America.
_gsrx_vers_837 (GS 7.0.15 (837))Bosch D8103 Intrusion Alarm System Enclosure Gray Steel [CTSA]
$24.97
Napco StarLink SLE-LTEV Sole Path Verizon LTE Intrusion Communicator. Brand New
$64.99
Intrusion Honeywell 6290W Touch Center 7" Color Wireless Touchscreen Keypad Alar
$240.00
Popular Tutorials
Alarms and Indicator Circuit diagrams