HANGKAI 3.5 4 6 6.5 7 HP Outboard Motor Boat Engine 2 Stroke Water Air Cooling for Sale

Recent Threads

On eBay Now...

HANGKAI 3.5 4 6 6.5 7 HP Outboard Motor Boat Engine 2 Stroke Water Air Cooling For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

HANGKAI 3.5 4 6 6.5 7 HP Outboard Motor Boat Engine 2 Stroke Water Air Cooling:
$228.43

Welcome to faucetworldDescriptionNotice: Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). (if you do not know how to handle this, please contact us). our outboard motor doesn't with oil of gear, please prepair it by yourself. Keep in mind that you must add oil on the gear beofore use !!!
About certification:We can only provide CE certification, there is no other certification can be provided, thanks for your understanding.Pay Attention1. About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2. The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it. Customer who has high expectations on speed, please be noticed.
3. It can be marched with inflatable boats, rubber boats or fishing boats.4. Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.SKU: OT-028----(2.5kw/3.5HP 2-Stroke)There are two pull starter included in the parcel(one is the machine, another one for spare)we don't supply wearing parts (pull starter)for free.STRICTLY FOR PROFESSIONAL USE ONLY".Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode.Specification:Short Shaft: 40cmOverall length: 92CM
Overall widteh:36.5cm
Overall height: 22cm
Transom height: 42cm
Full throttle perating range: 4000-5000r/min
Maximum output: 2.5kw(3.5HP)
Speed: 10km/h
Type: 2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start]
Propeller mark: 7-1/45-A(inch)
The engine and the propeller ratio: 2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 35:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
When at normal cruising, the appearence of the senveth picture. Falling back the boat, the appearence of the outboard motor likes the eighth picture. Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.Announcements:After in the sea water or turoffer water cruising
1. Use the fresh water cleaning the outboard motor
2. With the moderate velocity circulating the engine, cool off the water chanel with fresh water.
3. Before completely running out cooling water, don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4. The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.5. Before the long term storing,you should run out of the gasoline in the fuel tank.SKU: OT-ML-132---(3.6HP 2-Stroke)
Mixed Rating: Fuel : Oil (25/50:1)
Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed modeShort Shaft: 40cmHeight:43cm/16.92inchSTRICTLY FOR PROFESSIONAL USE ONLY1. Start-In-Gear protection/clutch feature prohibits prop rotation while idling.·2. Lift/Tilt feature for shallow water operation and convenience.3. Features 360 degree steering rotation for reverse without gear shifting.4. Superior engine water cooling system for improved engine performance.5. Easy pull off engine cover with push button latch for instant motor access.
Product Description:
Features: Features 360 degree steering rotation for reverse without gear shifting .Start-In-Gear protection/clutch feature prohibits prop rotation while idling .Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance. Easy pull off engine cover with push button latch for instant motor access. Standard CDI ignition system for easy starting and improved performance. Vertical mount engine design for increased power, performance and durability. Superior carbonation system with primer bulb for increased efficiency.Twist grip throttle handle and engine stop button for improved response .Superior outboard anti corrosion system and anodes for increased durability .Durable cast nylon plastic construction for superior corrosion protection .Through the prop exhaust outlet for decreased noise and pollutant .Black propeller or white propeller would be sent at random.Shipping Weight: 21.4 pounds
SKU: OT-ML-279---(3.5HP 2-Stroke)Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed modePlease Notice: STRICTLY FOR PROFESSIONAL USE ONLYWhat you will receive is our new version of this boat engineThe trademark will be Yadao instead of Speeda.Short Shaft:4 0cmOverall length: 92CM
Overall widteh: 36.5cm
Overall height: 22cm
Transom height: 42cm
Full throttle perating range: 4000-5000r/min
Maximum output: 2.5kw(3.5HP)
Speed: 12km/h(four people)
Type: 2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start]
Propeller mark: 7-1/45-A(inch)
The engine and the propeller ratio: 2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 35:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
When at normal cruising,the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture. Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.Announcements:After in the sea water or turoffer water cruising
1. Use the fresh water cleaning the outboard motor
2. With the moderate velocity circulating the engine, cool off the water chanel with fresh water.
3. Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4. The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5. Before the long term storing,you should run out of the gasoline in the fuel tank. OT-MLLCR-566(Air Cooling, 3.5HP 2 Stroke)Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Pay Attention

1. About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.

2. The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.

3. It can be marched with inflatable boats, rubber boats or fishing boats.

4. Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.

Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

STRICTLY FOR PROFESSIONAL USE ONLY

Please Note:

There are two pull starter included in the parcel(one is the machine, another one for spare)

We don't supply wearing parts (pull starter)for free.

If you want buy one please contact us

Short Shaft:40cm

Description:

Overall length:92CM

Overall wideth:36.5cm

Overall height:22cm

Transom height:42cm

Full throttle perating range:4000-5000r/min

Maximum output:2.5kw(3.5HP)

Speed:10km/h

Type: 2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark:7-1/45-A(inch)

The engine and the propeller ratio:2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）

Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L

Announcements

After in the sea water or turoffer water cruising

1. Use the fresh water cleaning the outboard motor

2. With the moderate velocity circulating the engine,cool off the water chanel with fresh water.

3. Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.

4. The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.

5. Before the long term storing,you should run out of the gasoline in the fuel tank.

SKU: OT-MLLCR-567(Water-Cooling, 3.5HP 2 Stroke )

OT-MLLCR-566(Air Cooling, 3.5HP 2 Stroke)Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear before use !!!

About certification:

We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.

Pay Attention

1. About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.

3. It can be marched with inflatable boats, rubber boats or fishing boats.

4. Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.

Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode

STRICTLY FOR PROFESSIONAL USE ONLY

Please Note:

There are two pull starter included in the parcel(one is the machine, another one for spare)

We don't supply wearing parts (pull starter)for free.

If you want buy one please contact us

Short Shaft:40cm

Description:

Overall length:92CM

Overall wideth:36.5cm

Overall height:22cm

Transom height:42cm

Full throttle perating range:4000-5000r/min

Maximum output:2.5kw(3.5HP)

Speed:10km/h

Type: 2-stroke

Ignition system: CDI system

Starting system: Manual start

Staring carburetion system: Choke start

Propeller mark:7-1/45-A(inch)

The engine and the propeller ratio:2:1

Recommended fuel: Regular unleaded gasoline

Fuel to oil ratio: 25:1 （Please be suject to this version, and disregard the manual about this point）

Gear ratio: 27/13

Maximum speed: 10 km / h

Built-in fuel tank: 1.3L

Fuel consumption per hour: 1.5L

Announcements

After in the sea water or turoffer water cruising

1. Use the fresh water cleaning the outboard motor

2. With the moderate velocity circulating the engine,cool off the water chanel with fresh water.

4. The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.

5. Before the long term storing,you should run out of the gasoline in the fuel tank.

Notes：Please note that this product is manual available in English, German and French, please contact customer service for more information. Note：Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself. PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping:2-9 working days to: USATerms of sales

We maintain high standards of excellence and strive for hundred percent customer satisfaction. response is very important to us. We hope that you contact us immediately before you give neutral or negative response, so that we can address your concerns. It is impossible to address issues if we do not know about them!

About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions.