DC10-55V 60A Max Digital LCD PWM Motor Speed Controller Reversible Time w Remote for Sale

Recent Threads

On eBay Now...

DC10-55V 60A Max Digital LCD PWM Motor Speed Controller Reversible Time w Remote For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

DC10-55V 60A Max Digital LCD PWM Motor Speed Controller Reversible Time w Remote:
$32.99

Features:
1: Equipped with wireless remote control.
2: Multiple limit modes available.
3: Can be set to start slowly.
4: Upper and lower speed limits can be set.
5: Can set the total working time.
6: Support separate speed regulation of forward speed and reverse speed.
7: Two modes, manual and automatic, are available.
8: LCD screen with backlight, can display working time, percentage of rotation speed, current mode, forward rotation, reverse rotation status.
9: Touch switch to switch forward and reverse, jog acceleration and deceleration solve the problem of the traditional potentiometer.

Condition: 100% Brand New
Input voltage: DC10-55V (the specific voltage is equal to the rated voltage of the motor)
Output voltage: linear under load
Instantaneous current: 60A Continuous current: Within 40A
Forward rotation: Support Wireless remote control: Support
Timing timing: Yes
Limit function: Yes
Slow start slow stop: can be set
Speed digital display: 0-100 percentage table
Speed regulation type: Flow regulation
Speed regulation mode: Jog +-
Speed range: 0-100%
Control frequency: 15KHZ
Wiring type: Fence type terminal
Support motor: Brushed motor
Module size: 148mm * 95mm * 36mm / 5.82" * 3.74" * 1.41"
Panel opening: 142mm * 88mm / 5.59"* 3.46"Instructions:
Long Press the "FWD/REV" button to initiatethe backlight mode.
0-1-2-3-4-5-6-7-8-9-E function Settings are as follows:
Function0--Manual Automatic mode: 1 indicates manual mode 2 Indicates automatic mode 1 Indicates manual mode By default.
Function 1--Slow start time setting: 000-100 Slow start to 100% speed time is adjustable between 0-10 seconds The default is 1 second.
Function 2--Slow stop time setting: 000-100 Slow stop time is adjustable between 0 and 10 seconds The default is 1 second.
Function 3--Lower speed setting: 000-080 The minimum speed is adjustable from 0 to 80% and is less than the maximum speed setting value is 0 by default.
Function 4--The maximum speed setting: 000-100. The maximum speed is adjustable from 0 to 100%. The setting value is greater than the minimum speed.
Function 5--Acceleration and deceleration value setting: 001 002 005 010 015 020 025 The speed changes by 1%,2%,5%,10%,15%,20%,25% each time the button is pressed.
Function 6--The total motor running time setting: 1 SEC minimum -99 hours 59 minutes 59 seconds Maximum default is 99 hours 59 minutes 59 seconds.
Function 7.8.9. Timingsetting for fully automatic mode:
Function 7--Forward time setting: 0 seconds minimum -99 hours Maximum Default is 10 seconds
Function 8--Stop time setting:0 seconds Minimum -99 hours Maximum Default is 10 seconds
Function 9--Reverse time setting: 0 seconds minimum -99 hours Maximum Default is 10 seconds
Function E--Limit mode selection:
E1: Infinite bits Unlimited bits By defaultE1: unlimited bits. The default is unlimited bits
E2: Press the start motor to turn forward, turn to the positive limit motor to stop, press the start reverse.
E3: Press the start motor to turn forward, turn forward to the positive limit motor reverse, reverse to the reverse limit motor stop.
E4: Press the start motor to turn forward, turn to the positive limit motor reverse, cycle work.
Select manual automatic mode: press the MENU key 1 to display 0 to enter manual mode and automatic mode. Select 1 to select manual mode and 2 to select automatic mode, press the Add/subtract key to switch, and press RUN/STOP to save and exit.
Press the MENU key 1 to display 0 to enter the manual and automatic modes. Select 1 to enter the manual mode and 2 to enter the automatic mode. Press the UP/DOWNkey to switch,and press RUN/STOP to save and exit.

Note:
1. Please allow 1-3mm difference due to manual measurement.
2. The input must be divided into positive and negative. The input voltage must be equal to the rated voltage of the motor (within 10V-55V).
For example, the rated voltage of the motor is 12V, and the input governor is 12V. The rated voltage of the motor is 36V. The voltage of the governor is 36V.
3. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

Package Included:
1 X DC Motor Speed Controller
1 X Wireless Remote Control
2 X Cable