Pre Wired LED Micro Wire Water Resistant Multi Color Flash 0805 3528 US Ship for Sale

Recent Threads

On eBay Now...

Pre Wired LED Micro Wire Water Resistant Multi Color Flash 0805 3528 US Ship For Sale

Pre Wired LED Micro Wire Water Resistant Multi Color Flash 0805 3528 US Ship:
$1.89

20cm (8") Pre-Wired LEDYou will not find a similar item to this on . There are many potential applications for this LED. Wearable electronics, crafts, model making, custom wiring, etc. In the darkened images the LED is drawing 20mA of current. This item is of limited availability.
0805 LED:
This is the most popular LED for hobbies and custom wiring. The 0805 is very tiny and can be routed/placed where other LED's cannot. The LED is bright and a very high value resistor can be used to achieve the desired effect. The light source is pin-point with wide dispersion. Flashing LEDs: roughly 8 flashes every 5 seconds, equal time on/off.3528 LED:
Another popular LED variation. This LED projects a spotlight or flashlight dispersion of around 120 deg. It can be placed in various angles/positions to illuminate a surface evenly with a consistent light level. This LED can also use a very high value resistor to achieve the desired effect. In the image the LED is 4" away from a white surface and the brightest spot is 6" with diffusion up to 4".
Quantity: 1 pieceFeatures:LED sizes:
0805 (2 x 1.5 x .7mm)3528 (3.5 x 2.8 x 1.25mm)
LED's chosen for optimal brightness.Leads are small, flexible and durable.
Twisted 30AWG enameled wire - 8" wire length + 1" lead length.
Ends tinned and anode marked.
Carefully hand soldered. (tested for shorts and diode integrity)
The back of the LED is enamel/epoxy coated for insulation and durability.
LED is functional with over 5M Ohm resistance across anode/cathode under water. *Water-resistant
The LED's have been tested to draw up to 30mA.*Please note this is a hand made item and there may be structural variations which do not affect functionality.
Note: The LED is supplied without a resistor due to the varying voltages the particular application will supply. A resistor must be used to limit current no matter the application. If a resistor is not used the LED can be permanently damaged. In addition.. a minimum power source of 3 Volts is recommended for reliable and long term functionality of the LED.**In order to figure the proper current for the LED you need three values: the Voltage source, the LED voltage drop, and the resistor value. The LED voltage drop for the red, green, orange, yellow, and pink LEDs is around 2 Volts. The blue, white, and UV LEDs are around 3.2V. To calculate the resistor needed for your application use this formula: Voltage source minus Voltage drop divided by the resistor value. For example: if you have a 5V source and a blue LED, and want the max output (close) from the LED (20mA) use this formula: 5-3.2/100 Ohm = 0.018 (18mA). Please see my other sales for resistors which are available inexpensively.
Shipping:I pack and ship your items quickly! You are purchasing from a US seller who ships from the USA. Items are shipped within 2 business days for small orders. Orders placed over the weekend go out Monday. Your order is always assured to arrive quickly and in good condition. This item is shipped via USPS First Class Parcel with tracking. Please be sure your confirmed PayPal address is current to avoid shipping delays.Customer Satisfaction:I greatly appreciate my customers and do my best to provide a quality product. If for any reason you have an issue or question regarding an item, please contact me before opening a case or leaving negative response. Your positive response and continued business is important to me!