POWER TEAM C1010C TEN TON TEN INCH STROKE HIGHEST AND BEST QUALITY REBUILDABLE for Sale

Recent Threads

On eBay Now...

POWER TEAM C1010C TEN TON TEN INCH STROKE HIGHEST AND BEST QUALITY REBUILDABLE For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

POWER TEAM C1010C TEN TON TEN INCH STROKE HIGHEST AND BEST QUALITY REBUILDABLE:
$395.00

I have personally rebuilt over 1,000 cylinders with my two hands (I stopped marking wall above shop table at 1000). I am in my late fifties and have been at this for a while.

The reason I say this, is because, the "Power Team" brand is my favorite (Second place runner up is TITANIUM PRO).

Power Team is the toughest, longest lasting, best performing, and easiest to rebuild that you can purchase, Period.

If you are intowhat is the “last price” “Lowest price”“Disposable” Chinese junk this is not for you.

These cylinders are for the buyer who requires QUALITY – RELIABILITY – LONGEVITY – REBUILDABILITY.If you are replacing or including this into a project or product that you take pride in keep reading. If you yourself are producing or working with clients who demand andappreciatequality read on.

We all know we get what we pay for!

The cylinder says “Short Tons” which means a 2000 pound ton (long ton 2240 not American).

The cylinder is rated at maximum output of 11.2 tons. Bear in mind that tonnage is reached when powered by hydraulic fluid at 10,000 PSI (700 Bar).NOTE:your pump or power unit can be powered / fed by air, electric or fossil fuels, however the oil output must be 10,000 to achieve max tonnage. The cylinder will work fine at lower PSI, however the tonnage will be lower.Each 1,000 PSI is almost same in Tonnage (Approx.) E.g.2,000 = approx. 2.2 tons.

NOTE: Your hydraulic hose supply must be “True Jack Hose” 10,000 PSI – 700 Bar with a minimum 2 – 1 safety factor so working pressure @ 10,000 and burst pressure would be at @ 20,000.

Ten inch stroke

We can supply hoses adapters and bases to assist you, please contact us.