Dental Flexible Denture Machine For Making Flexible Removable Partial Dentures~ for Sale

Recent Threads

On eBay Now...

Dental Flexible Denture Machine For Making Flexible Removable Partial Dentures~ For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Dental Flexible Denture Machine For Making Flexible Removable Partial Dentures~:
$403.96

SpecificationMount Type: DesktopAssembly Required: YesMaterial: Cast IronStyle: ModernColor: Gray, Silver, BlackVoltage: AC 110V/60HzPower: 350WPower Source: Corded ElectricityPlug Type: US StandardHeating Temperature: 282-288°C/539.6-550.4°FPressurization Time: 7 Min 30 Sec - 11 MinHeat Press Machine Bottom Bracket Size: 19.5*9.5*19.5cm/7.68*3.74*7.68inOverall Heat Press Machine Size (L*H): 46*52cm/18.11*20.47inHeating Main Part Size: 16*12*13cm/6.3*4.72*5.12inHeater Size: 24*18.2*27.5cm/9.45*7.17*10.83in Package Size: 56*39*31cm/22.05*15.35*12.20inGross Weight: 27.65kg/60.96lbsNet Weight: 26.51kg/58.44lbs Package Included1* Heater1* Heat Press Machine3* Extension Rods1* Power Cord1* English ManualOther Accessories

Application

It can be used to make flexible, removable partial dentures for dentistry, clinics, hospitals, factories, and so on.

How to Install

Screw the three extension rods correspondingly.
Place the type box on the bottom plate of the heat press.
Put the heating barrel into the heating furnace above the temperature control box.
Put the invisible glue in the heating barrel (it is better to apply high-temperature oil on the invisible glue to facilitate the rewinding of the material skin).

How to Use

Turn on the power after installation.
Set the heating temperature (factory setting: 548.6℉) and holding time (factory setting: 480 seconds).
After hearing the tone, move the heating barrel together with the invisible rubber to the type box, put the top material block, and rotate the three extension rods until the die-casting is completed.
After the die-casting is completed, the material skin should be withdrawn as soon as possible, so as not to be badly handled after cooling down.

Specification

Mount Type: Desktop

Assembly Required: Yes

Material: Cast Iron

Style: Modern

Color: Gray, Silver, Black

Voltage: AC 110V/60Hz

Power: 350W

Power Source: Corded Electricity

Plug Type: US Standard

Heating Temperature: 282-288°C/539.6-550.4°F

Pressurization Time: 7 Min 30 Sec - 11 Min

Heat Press Machine Bottom Bracket Size: 19.5*9.5*19.5cm/7.68*3.74*7.68in

Overall Heat Press Machine Size (L*H): 46*52cm/18.11*20.47in

Heating Main Part Size: 16*12*13cm/6.3*4.72*5.12in

Heater Size: 24*18.2*27.5cm/9.45*7.17*10.83in

Package Size: 56*39*31cm/22.05*15.35*12.20in

Gross Weight: 27.65kg/60.96lbs

Net Weight: 26.51kg/58.44lbs

Package Included

1* Heater

1* Heat Press Machine

3* Extension Rods

1* Power Cord

1* English Manual

Other Accessories

Notes

Please check the style and size before purchasing.
Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.
The machine will keep heating up after being powered on until the set temperature is reached. It starts counting down when it reaches the set temperature, and the beep sounds when the countdown ends. The machine runs this program repeatedly in the power-on state and must be turned off after each use and turned on again when it is used again.
When the temperature is lower than the set temperature, the indicator light will be on, which means it is continuing to heat. When the temperature is constant, the indicator light turns off.
Due to the different altitudes and seasons, please set the heating temperature and holding time according to the actual situation. If the color of the finished product is too dark, please increase the setting temperature and holding time. If the color is too light, please lower the setting temperature and holding time.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

On Jun 16, 2026 at 02:11:48 PDT, seller added the following information: