Dental Flexible Denture Machine, 110V Dental Flexible Denture Injection System for Sale

Recent Threads

On eBay Now...

Dental Flexible Denture Machine, 110V Dental Flexible Denture Injection System For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Dental Flexible Denture Machine, 110V Dental Flexible Denture Injection System:
$403.97

SpecificationsMount Type: DesktopAssembly Required: YesMaterial: Cast IronStyle: ModernColor: Gray, Silver, BlackVoltage: AC 110V/60HzPower: 350WPower Source: Corded ElectricityPlug Type: US StandardHeating Temperature: 282-288°C/539.6-550.4°FPressurization Time: 7 Min 30 Sec - 11 MinHeat Press Machine Bottom Bracket Size: 19.5*9.5*19.5cm/7.68*3.74*7.68inOverall Heat Press Machine Size (L*H): 46*52cm/18.11*20.47inHeating Main Part Size: 16*12*13cm/6.3*4.72*5.12inHeater Size: 24*18.2*27.5cm/9.45*7.17*10.83inPackage Size: 56*39*31cm/22.05*15.35*12.20inGross Weight: 27.65kg/60.96lbsNet Weight: 26.51kg/58.44lbsPackage Included1* Heater1* Heat Press Machine3* Extension Rods1* Power Cord1* English ManualOther Accessories

Dental Flexible Denture Machine, 110V Dental Flexible Denture Injection System

DescriptionThis split dental flexible denture machine contains a heater and a heat press machine, which combines efficient heating and precise heat pressing. It is easy to operate and has excellent performance. Whether you are a beginner or an experienced technician, you can easily get started and create a comfortable and beautiful denture for your patients, making your smile more confident and bright.

Key FeaturesEfficient Work: The machine has a high success rate of casting, and even ordinary tooth boxes can be injection molded, which greatly improves the working efficiency and flexibility of use. It produces dentures without any waste edges, and the grinding process can be completed in one go.

Adjustable Design: You can freely adjust the temperature (539.6-550.4℉) and pressurization time (7 minutes 30 seconds - 11 minutes) to meet specific injection needs according to different materials and sizes.

Practical Tools: This product consists of a heater and a heat press machine. The heater can melt the flexible denture material in the cartridge, and the hot press can inject the molten material into the pre-prepared flask (not included), which is an important equipment for invisible denture processing and manufacturing, and can be used to make flexible removable partial dentures.

Easy to Operate: The intuitive display interface, sensitive buttons, and knobs, as well as the detailed instruction manual help you quickly master the operation method.

Safe and Reliable: It is equipped with automatic temperature control, automatic heat preservation, and a sound prompt function. The back of the machine is designed with multiple cooling holes to quickly dissipate the heat generated during work. It also has power insurance protection, which effectively protects the operational safety and normal operation of the equipment.

DetailsExtension Rods: They are ergonomic and comfortable to hold, facilitating you to finish the die-casting work more easily.

Stable Feet: They make sure the machine is placed smoothly, greatly improving the safety of use.

Application
It can be used to make flexible, removable partial dentures for dentistry, clinics, hospitals, factories, and so on.

Specifications
Mount Type: Desktop
Assembly Required: Yes
Material: Cast Iron
Style: Modern
Color: Gray, Silver, Black
Voltage: AC 110V/60Hz
Power: 350W
Power Source: Corded Electricity
Plug Type: US Standard
Heating Temperature: Time: 7 Min 30 Sec - 11 Min
Heat Press Machine Bottom Bracket Size: Heat Press Machine Size (L*H): 46*52cm/18.11*20.47in
Heating Main Part Size: 16*12*13cm/6.3*4.72*5.12in
Heater Size: Size: 56*39*31cm/22.05*15.35*12.20in
Gross Weight: 27.65kg/60.96lbs
Net Weight: 26.51kg/58.44lbs

Package Included
1* Heater
1* Heat Press Machine
3* Extension Rods
1* Power Cord
1* English Manual
Other Accessories

Notes
1. Please check the style and size before purchasing.
2. Please read the instruction manual completely before installation and use, and pay particular attention to the safety instructions included.
3. The machine will keep heating up after being powered on until the set temperature is reached. It starts counting down when it reaches the set temperature, and the beep sounds when the countdown ends. The machine runs this program repeatedly in the power-on state and must be turned off after each use and turned on again when it is used again.
4. When the temperature is lower than the set temperature, the indicator light will be on, which means it is continuing to heat. When the temperature is constant, the indicator light turns off.
5. Due to the different altitudes and seasons, please set the heating temperature and holding time according to the actual situation. If the color of the finished product is too dark, please increase the setting temperature and holding time. If the color is too light, please lower the setting temperature and holding time.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement and make sure you do not mind before ordering.

PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping:2-9 working days to: USATerms of sales

We maintain high standards of excellence and strive for hundred percent customer satisfaction. response is very important to us. We hope that you contact us immediately before you give neutral or negative response, so that we can address your concerns. It is impossible to address issues if we do not know about them!

About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any characteristics, high reliabilityFeatures2Made of high quality material, DurableFeatures2:Made of high quality material, DurableFeatures3:Stable characteristics, high reliability√Service√√Any problem, please contact the seller√--Service--Any problem, please contact the seller!*··*Feature*··*A+++++ Seller!*·*Feature*·*FAST SHIPPING! GREAT SERVICE!VoltageAC 110V/60HzPower350WHeating temperature282-288 ° CPressurization time7 minutes 30 seconds - 11 minutesPacking size40*34*57cmGross weight30kgBrandUnbrandedMPNDoes Not ApplyUPCDoes not applyTypeDental Lab Flexible Denture MachineIntended Use/DisciplineDentistry