On eBay Now...

Crystal Clear Epoxy - 1 Gallon Combined - table tops, Small CASTINGS and CRAFTS For Sale

Crystal Clear Epoxy - 1 Gallon Combined - table tops, Small CASTINGS and CRAFTS


Buy Now

Crystal Clear Epoxy - 1 Gallon Combined - table tops, Small CASTINGS and CRAFTS:
$59.48

1 Gallon (Kit) for Small Castings,Table/Bar Top Epoxy Resin, Ultra Clear Finish

Great for DIY and Pros.

(Free shipping to U.S. and Puerto Rico)

GENERAL PURPOSE CLEAR EPOXY RESIN.

We are a family owned small business based out of Temecula California. Our main goal is to provide a quality product at a fair price and offer excellent customer service.

Perfect fortabletops,bar tops,jewelry/craft making, coasters,small castings(under 2" thick with several 1/2 inch pours),some marine applications,pebble coatings and much more.

Please Note:This kit is one gallon in total. Kit includes 1/2 gallon of Resin and 1/2 Gallon of Hardener. Packaged by weight. Resin weight is 4.10 pounds and the hardener weight is 3.14 pounds. This formula works great for a wide variety of applications.

Easy mix at 1:1 ratio by volume, long work time, with great clarity and a high gloss finish. Cures rock hard and is scratch resistant. Excellent chemical and water resistance(s), coupled with superb mechanical properties, make this resin a candidate for all applications.1/2 inch pour is maximum at one time.

Important: With this resin the thin Hardener must be pouredFIRSTand then the thicker Resin into the hardener. Then mix well for 5 minutes.

Properties:

  • Easy Mix Ratio 1:1 by volume
  • Work time approximately 35 minutes (200gram mass)
  • Hardness D78
  • Mixed Viscosity 1200cps.
  • Chemical Resistance is excellent.
  • Moisture Resistance is excellent.
  • 1/2 inch pour is maximum at one time or it may overheat.
  • Cure Times / Speed

    Typical work time on this item is roughly 35 minutes based on mass and temperature. Thin film set time (3mil. film) isroughly5 hours at 78F. Cure time is 24 hours at normal conditions. Work environment must be between 72 to 85 degrees Fahrenheit.

    This product cures to a brillianthigh gloss finish.The finished product will bevery solid, smooth, clear, and display a brilliant high gloss finish similar to glass.

    Mixing, Storage, and Application

    Mix this resin 1:1 by volume using a measuring cup. Precise Measurement Required. Do Not Pour Entire Bottles Together Without Measuring First. If mixing by weight reach out to us for instructions. When mixing this product, make sure to use a round cup & mix thoroughlyscraping all sides and bottom of mixing container. Improperly mixed epoxy can create amajor headache.Remember that thermoset plastics are temperature sensitive. Cold weather slows the cure process down, whereas heat speeds curing up. This epoxy likes warm temperatures (72 degrees and above). Always mix chemicals at room temperature and warm the bottles first. For BEST results you MUST pour the hardener (B) into the mixing cup FIRST and then pour the epoxy (A) second.. Pour along the side of the container to help alleviate air entrapment. Mix for at least 3-5 minutes in a in a round motion until chemicalare clear and free of striations. Allow the mixed components to stand in your mixed cup for at least 5 minutes. This allows for bubbles to rise to the surface. Small castings and potting units may take longer to cure than larger items. 1/2inch pours are the maximum with this product. Not a deep pour product. And Again Do Not Just Pour the Two Bottles Together Without Measuring.


    Pro Tips --

    Warm the resin and hardener before mixing.

    Use heat gun or torch to eliminate bubbles.

    Keep working area at least 72-75 degrees Fahrenheit. Resin can be very sensitive to colder temperatures.

    Watch lots of YouTube videos on how to use Epoxy Resin

    Mix SLOWLY and extremely well.

    Do NOT scrape product out of the mixing cup into your project. Just use what flows out freely. Unmixed product sticks to the sides and you don't want that in your project.

    When in doubt pour into second mix cup and mix again.

    Practice to see how the product works before pouring on your final project.

    This chemical needs to be stored in a dry, safe,temperature controlled environment. Always keep the lidstightly sealed when not in use. Remember, oxygen can oxidize and can rapidly degrade the epoxy and hardener. Moisture is also a potential issue. Always keep the bottles sealed when not in use.


    Always Be Safe:When applying this product, use gloves, goggles, respirator and proper safety equipment. Please refer to the safety data sheet before using any of our epoxy products.

    Product has approximately a 1 year shelf life from the time of purchase if unopened. 3-6 months if opened.


    SHIPPING:Our warehouse ships items within 1 business day of order. Maximum of 10 gallons shipped to one customer during shortages. We ship UPS and USPS We will forward all tracking information once your item has shipped. Please be advised thatour normal business hours are Monday to Friday. UPS and USPS usually have 1-5 day transit.

    RETURNS:Our goal is toprovide quality products and keep our customers happy. If you are not satisfied with your purchase,we will issue you a full refund.We do ask that the buyer pays for return shipping.



Buy Now

Crystal Clear Epoxy for bar tops, tables, crafts, jewelry, castings-1 Gallon Kit picture

Crystal Clear Epoxy for bar tops, tables, crafts, jewelry, castings-1 Gallon Kit

$56.95



Crystal Clear Epoxy Resin General Purpose Bar Table Top Coating - 1 Gallon Kit picture

Crystal Clear Epoxy Resin General Purpose Bar Table Top Coating - 1 Gallon Kit

$55.95



Crystal Clear Epoxy Resin General Purpose Bar Table Top Coating - 2 Gallon Kit picture

Crystal Clear Epoxy Resin General Purpose Bar Table Top Coating - 2 Gallon Kit

$98.95



Popular Tutorials

Alarms and Indicator Circuit diagrams Audio electronic circuits list Circuits for Cars/Motorcycles Computer/PC Hardware Circuits : Design Ideas : Fun/Games Circuits : Signal/Sequence/Misc. Generators : Home/Garden related Circuits : Lights & LED Circuits : Motor Circuits : Music related Circuits : < Oscillator Circuits : Power Supply (PS) Circuit diagrams : Radio,transmitter,receiver circuits : Remote Control Circuit diagrams : Robotics related Circuits : Sensors : Telephone Circuit diagrams : Test & Measurement Circuits :