CLASS B Dental Autoclave Steam Sterilizer Automatic Medical Drying Sterilization for Sale

Recent Threads

On eBay Now...

CLASS B Dental Autoclave Steam Sterilizer Automatic Medical Drying Sterilization For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

CLASS B Dental Autoclave Steam Sterilizer Automatic Medical Drying Sterilization:
$448.80

14L Autoclave Steam Sterilizer

• Description:

• Chamber capacity:Ø25×D28CM (Ø9.84×D11.02inch)

• Inside capacity：14 Liter

• Material：Stainless steel #304

• Outside Size：46.5*35*36 CM

• Packing Size：51*39*40 CM

• G.W:15KGS

• Sterilizer temperature：121℃

• Sterilize pressure：0.12Mpa

• Sterilize time：25Min

• Power：900W

• AC110V/8A

• AC220V/4A

• Auto supply water system: Manual give the water

• Safety valve: automatic discharge in excess of standard value

• Temp and Press display：Pressure gauge

• Disinfection principle：Uses the vapor power emissions cold air / 2 times

• Operation Steps：

• 1.Plug in the power cord

• 2.Shut exhaust needle valve in the Close (clockwise)°

• 3.Adding about 800 ml of distilled water. Close the door cover, tight the rotate handle

• 4. Start the timer knob to 121℃position. Sterilization is working.

• 5.Sterilization is complete, please be sure to open the exhaust needle valve firstly (inverse clock direction)

• 6.Wait for the pressure gauge pointer to zero, opened the door cover

• Caution：

• Every time sterilization, must add about 800 ml of distilled water

• Use a separate socket (confirm the socket of the output voltage)

• Pressure gauge pointer in the red areas, please be sure to first Open the exhaust steam of the needle valve

• Packing:

• main unit 1pc

• Standard accessories:

• Plate 3pcs ( Size:201*136*21 mm)

• Shelf 1pc

• Take Plate tool 1pc steam exhaust pipe 1pc(1 meter length)

18L Autoclave Steam Sterilizer

Chamber capacity:Ø25×D35CM (Ø9.84×D13.78inch)

Inside capacity：18 Liter

Material：Stainless steel #304

Outside Size(L*W*H)：58*39*36 CM

Packing Size(L*W*H)：64*44*36.5CM

Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa

Sterilize time：25Min/6Min

Power：1000W

AC110V/8A

AC220V/4A

SAFETY : Heating-over protection ; safety valve

Safety equipment:

1.Pressure adjustment: adjust the inter pressure, if over standard value

automatic vent

2. Avoid overheat protect device: when inter temperature overheat, power break electric current automatically.

Temp and Press display :Led several windows

Disinfection principle：Uses the vapor power emissions cold air / 2 times

Caution：

1.Before each use, distilled water is better .

2.Do not use any corrosive or chemical water as the disinfection.

3.Do not share the same electricoutllet with other electrical apparetus.

4.Please pay attention to correct voltage and frequency.

5.Connect steam exhaust pipe with the steam vent，before operation.

Packing:

main unit 1pc

Standard accessories:

Tray Rack 1pc

Tray 3pcs（size：26*15*2cm）

Tray removal tong 1pc

Draining Tube 1pc

Intake pipe 1pc

Operation manual 1pc

Power cord 1pc

18L Autoclave Steam Sterilizer Drying Function

Description:

Voltage:110V/220V; 50Hz/60Hz

Heater Power: 1100W

Tank capacity: 18L

Inside dimensions: Φ250 x D350mm

Sterilize temperature: 122℃& 134℃

Sterilize pressure: 0.12Mpa & 0.23Mpa

Sterilize time: 25min & 6min

Drying time: 40min

Tank Material: Stainless steel #304

Machine size (L*W*H): 60 * 39 * 36cm

Packing size (L*W*H): 61 * 53 * 40cm

N.W.: 33KG

G.W.: 35KG

Standard accessories:

Plate * 3PCS（size：26*15*2cm）;

Shelf * 1PC;

Plate Taking tool * 1PC

Application: For dental, surgery, beauty salon, medical care, laboratory, and so on.

Caution：

1.After the completion of disinfection,please to wait for 10 minutes.

Pressure Gauge in red area. Do not rotate handle, open the steam discharge valve firstly.

2.Before each use,must supply water 800ml of distilled water .

3.Please close steam discharge valve before the disinfection.

4.Do not use any corrosive or chemical water as the disinfection.

5.Do not share the same electricoutllet with other electrical apparetus.

6.Please pay attention to correct voltage and frequency.

7.Connect steam exhaust pipe with the steam vent，before operation.

FDA Statement

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can offer on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

Seller number:0755-23998164

K181993

Device Classification NameSterilizer, Steam

510(K) NumberK181993

Device NameSTURDY Autoclave Super Microm (Models SA-260MA And SA-260MA-R)

Regulation Number880.688

Classification Product CodeFLE

Date Received7/26/2018

Decision Date11/1/2019

Device Class2

Regulation Number21CFR880.6880

If you have any questions, please contact us via message system:)

Please believe that our commitment and ability, positive response is not our goal, bring you a better experience is our common goal indeed.

Payment

We accept PayPal only.
The address in your paypal details will be used as the actual shipping adress, please make sure the adress is correct.

If you are planning on combining your items, please make sure that you wait until ALL sales have ended before you visit the checkout. All items must be paid within 7 days.

Shopping

The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events).

General shipping time is between 7-12 working days.
Some remote areas of Europe shipping time is around 15-25 days, and South America shipping will be more then 25 days.
(After the shipping started, the order will be monitored and the track of the item will be posted on paypal).

DestinationDelivery TimeWorking Days7-1210-1515-2525-40>50USItem arrived80%10%8%1%RefundASIAItem arrived30%40%20%10%RefundEUItem arrived20%20%50%10%RefundAUItem arrived30%30%20%20%RefundOther CountriesItem arrived5%10%10%60%--
Returns

Exchanges are offered for items that are defective or damaged when received, although this is highly unlikely. After exchanges are made and have not resolved the issue, we will refund the cost of the merchandise..

Defective items or problems with your order must be reported within 3 days after receiving. Please keep all packaging, documentation, packing list, etc. that came with your order. These will be used to verify claims if there is any problem with you.

Restocking fee will be charged for returned items without original package or any quality problem.Please contact us for details before returning your package to avoid misunderstanding.

[IMPORTANT]: Customer\'s item must be returned to our facility with the ROF (Return Order Form) at the buyers shipping expense.

About Us

We are one of the biggest dental products suppliers in China, which focus on manufacturing and selling high quality dental equipments, dental materials and carrying a full line of high quality products, like KAVO, NSK, WOODPECKER, ets.

We supply many kinds of dental Handpieces, Ultrasonic scalers, Light cure, Endodontics Instruments, Micro motor, Dental Leb Equipment, Orthodontics and dental consumables ect.

All our products are manufactured under the strict quality contorl guidelines established by ISO 9001:2000 international standard quality certification, most of them have FDA and CE certificate.

FDA Statement

Seller name: Dentalbaistra

Telephone number:0755-66587533