150L Large Volume Constant Temperature and Humidity Incubator 220V 800W for Sale

Recent Threads

On eBay Now...

150L Large Volume Constant Temperature and Humidity Incubator 220V 800W For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

150L Large Volume Constant Temperature and Humidity Incubator 220V 800W:
$2478.45

150L Constant Temperature and Humidity Incubator 220V 150L Constant Temperature and Humidity Incubator 220V Product Overview

The constant temperature and humidity incubator can control the high and low temperature and humidity, and is used to simulate the environmental temperature and humidity. It is widely used in drug, textile, food processing, biological culture, physical analysis and other tests and various temperature and humidity tests of industrial products.

Product Parameters Model HSP-150BEII Power supply 220V 1PH Power 800W Volume 150L Temperature range 5-65°C Temperature resolution 0.1°C Humidity range 45-95%RH Humidity Fluctuation ±3%RH Product size 66x64x142cm (26x25.2x55.9 inches) Net weight 100kg (220.5LBS) Note: The above temperature and humidity parameters can be measured at the no-load temperature of 28℃ and humidity of 65%RH. Attention

For the safety of the tests, please install the external grounding device, select the power supply matched with the equipment and install the leakage protection device.
It is strictly prohibited to use the equipment for the tests of inflammable, explosive, poisonous and strongly corrosive materials.
Place the equipment on the dry platform or ground, and keep it 50CM or above away from the wall.
Put the tested items on the tray as required, turn on the power, turn on the switch, and set the required temperature according to the operation instructions of the intelligent instrument.
Turn off the power when the equipment is not in use, and keep it dry and clean.
Please read the instruction of this product carefully before operation.

Product Features

The shell of the product is made of high-quality steel plates, the surface of the shell is firmly painted by electrostatic spraying, and the appearance is beautiful.
The machine adopts the intelligent microcomputer LCD control system and has the functions of timing, alarm, over-temperature protection, etc.
The Brand compressor achieves fluorine-free and environmentally friendly refrigeration and breeze circulation to ensure uniform temperature inside the box.
Balanced control over cooling and heating ensures small temperature fluctuation and more accurate temperature control.
The independent glass front door observation window is transparent and beautiful, which is convenient to observe the changes of the items in the box.
The steam humidification is adopted, The internal humidity is stable, the humidity fluctuation range is ±3%RH.
The machine has multiple safety measures, such as compressor overheat protection and instrument failure protection.
The intelligent defrosting system is adopted to ensure that the machine does not frost when running for a long time.
The machine has the one-button drainage function, and the operator can press the drainage button to discharge water after the machine stops.

Operation Method

Preparation stage: Before use, fill the humidifier bucket with purified water or distilled water and place it on the right side of the machine.
Start the machine: Turn on the power switch for about 3 seconds, display "end" in the lower row of the instrument, long press the "increase" button for about 2 seconds, and the machine enters the running state.
Set the state: In the machine running page, press "set" button, enter the state of cycle and set the section number, cycle value.
If the machine is not used for more than 24 hours after shutdown, click the "drain button" after power off, the water in the humidifier of the machine will be automatically discharged.
In the setting state, click the back key to return to the setting of the previous parameter, and the selected parameter value will blink to display.
Note: One cycle means that the controller runs from the first segment to the Nth segment (the number of segments required by the customer) for one cycle.

Product Display Item Number (148092): 1 x Constant Temperature and Humidity Incubator 150L 220V

You can make order with no worry.

Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.

Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Warranty: 6 months' warranty for the machines, not for the consumables.

We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

On Dec 12, 2025 at 00:33:12 PST, seller added the following information: