Warning: Cannot modify header information - headers already sent by (output started at /home/epn/detail.php:147) in /home/epn/detail.php on line 261
SIEMENS. P/N: 545-113. ANALOG OUTPUT PNEUMATIC (AO-P) TRANSDUCER. PANEL MOUNT. for Sale - electronic-circuits-diagrams.com
On eBay Now...

SIEMENS. P/N: 545-113. ANALOG OUTPUT PNEUMATIC (AO-P) TRANSDUCER. PANEL MOUNT. For Sale

SIEMENS. P/N: 545-113. ANALOG OUTPUT PNEUMATIC (AO-P) TRANSDUCER. PANEL MOUNT.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

SIEMENS. P/N: 545-113. ANALOG OUTPUT PNEUMATIC (AO-P) TRANSDUCER. PANEL MOUNT.:
$430.00

SIEMENS. P/N: 545-113 (545-113C). ANALOG OUTPUT PNEUMATIC (AO-P) TRANSDUCER. PANEL MOUNT., 19 TO 26 VAC., 1 VA POWER CONSUMPTION., INPUT SIGNAL/IMPEDANCE: 0 VDC TO 10 VDC / 20 OHMS, 180 OHMS FOR 4-20 mA., OUTPUT CAPACITY: 500 SCIM MINIMUM @ 5 PSI DROP., OVERALL DIMMENSIONS: 5 1/4\" LONG X 4 3/8\" WIDE X 3 1/16\" THICK., AIR SUPPLY PRESSURE: 20 PSIG ABSOLUTE MINIMUM, 30 PSIG MAXIMUM., AIR CONSUMPTION FOR COMPRESSOR: 10 SCIM., TUBING CONNECTIONS: (2) 1/4\" O.D. NOMINAL BARBED FITTINGS., OPERATING TEMPERATURE: 32°F TO 185°F., OPERATING HUMIDITY: 95% MAXIMUM., THE AO-P TRANSDUCER IS DESIGNED TO RECEIVE AN ELECTRONIC SIGNAL AND SEND A PNEUMATIC OUTPUT., HAS A 1 5/8\" DIAMETER GAUGE WITH 0 TO 30 PSI & 0 TO 200 KPA., HAS SEVEN 8\" LONG COLOR CODED WIRE LEADS., HAS INPUT SIGNAL SELECTION PLUG CONNECTIONS ON BASE., 1 VA MAX., REV. 3 AND NFP92H., METAL CONSTRUCTION., HAS A HAND/AUTO SWITCH., INCLUDES: TRANSDUCER, MOUNTING SCREWS, WIRE NUTS, INSTRUCTIONS MANUAL, PACKAGING AND BOX., ORIGINAL SIEMENS OEM REPLACEMENT PART., GUARANTEED TO WORK PERFECTLY., BRAND NEW CONDITION., NEVER USED., MADE IN THE USA., I CAN SUPPLY MORE PICTURES IF REQUESTED.



The AO-P transducer converts an electronic signal into a linear pneumatic signal for the accurate positioning of valve and damper actuators typically used in heating and air conditioning systems. The transducer is available in two different mounting styles: Remote Mount with its own integral enclosure and conduit connection; or Panel Mount for mounting in control cabinet applications. The transducer includes provisions for manual override, and does not require calibration.


  • Insensitive to vibration and mounting position to allow mounting directly on equipment and give stable performance

    • IHand-Auto switch and override dial allow for manual control of output pressure for troubleshooting and emergencies

    • IOptional electrical connections to remotely monitor Hand-Auto switch position and output pressure

    • IAccurate and repeatable output pressure signal

    • IEasy to install, no setup or calibration is required

    • IThe unit can be mounted directly on the wall or equipment without an additional enclosure to reduce cost

    • IFactory installed 0 to 30 psi (0 to 207 kPa) gauge is included

    Details for 545-113



    This 545 Electronic-to-Pneumatic Transducer converts an electronic signal into a linear pneumatic signal. This electronic-to-pneumatic transducer is panel mounted, insensitive to vibration, and has a hand-auto switch and override dial for manual control of output pressure for trouble-shooting and emergencies. The ambient operating and storage temperature range for this transducer is -40 degrees Fahrenheit to 185 degrees Fahrenheit.

    The AO-P transducer converts an electronic signal into a linear pneumatic signal for the accurate positioning of valve and damper actuators typically used in heating and air conditioning systems. The transducer is available in two different mounting styles: Remote Mount with its own integral enclosure and conduit connection; or Panel Mount for mounting in control cabinet applications. The transducer includes provisions for manual override, and does not require calibration.


    Features


    • Insensitive to vibration and mounting position to allow mounting directly on equipment and give stable performance

    • Hand-Auto switch and override dial allow for manual control of output pressure for troubleshooting and emergencies

    • Optional electrical connections to remotely monitor Hand-Auto switch position and output pressure

    • Accurate and repeatable output pressure signal

    • Easy to install, no setup or calibration is required

    • The unit can be mounted directly on the wall or equipment without an additional enclosure to reduce cost

    • Factory installed 0 to 30 psi (0 to 207 kPa) gauge is included

    • High capacity, non-bleed device.
    • IHigh capacity, non-bleed device.
    Buy Now

    SIEMENS. P/N: 192-203. TH192S PNEUMATIC ROOM THERMOSTAT & WALLPLATE picture

    SIEMENS. P/N: 192-203. TH192S PNEUMATIC ROOM THERMOSTAT & WALLPLATE

    $59.95


    SIEMENS. P/N: 192-203. TH192S PNEUMATIC ROOM THERMOSTAT & WALLPLATE #T27 picture

    SIEMENS. P/N: 192-203. TH192S PNEUMATIC ROOM THERMOSTAT & WALLPLATE #T27

    $79.99


    SIEMENS. P/N: GCA221.1U. OPENAIR ELECTRIC DAMPER ACTUATOR. 160 LB-IN, 120V, 2 PO picture

    SIEMENS. P/N: GCA221.1U. OPENAIR ELECTRIC DAMPER ACTUATOR. 160 LB-IN, 120V, 2 PO

    $260.00


    Popular Tutorials

    Alarms and Indicator Circuit diagrams Audio electronic circuits list Circuits for Cars/Motorcycles Computer/PC Hardware Circuits : Design Ideas : Fun/Games Circuits : Signal/Sequence/Misc. Generators : Home/Garden related Circuits : Lights & LED Circuits : Motor Circuits : Music related Circuits : < Oscillator Circuits : Power Supply (PS) Circuit diagrams : Radio,transmitter,receiver circuits : Remote Control Circuit diagrams : Robotics related Circuits : Sensors : Telephone Circuit diagrams : Test & Measurement Circuits :