On eBay Now...Permatex 64050 High Temperature Anaerobic Sleeve Retainer 50ml For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Permatex 64050 High Temperature Anaerobic Sleeve Retainer 50ml:
$51.36
Product DescriptionPermatex 64050 is a high-temperature anaerobic sleeve retainer supplied in a 50 ml bottle for securing slip- and press-fit cylindrical metal assemblies. It cures when confined between metal surfaces in the absence of air, bonds parts with diametral gaps up to 0.007 in (0.2 mm), and operates from -54°C to 204°C (-65°F to 400°F). Fixtures in about 1 hour with full cure in 24 hours and can provide up to 3,000 PSI holding power.
- Anaerobic retaining compound that cures when confined between metal surfaces; designed for cylindrical metal parts and assemblies.
- Temperature range -54°C to 204°C (-65°F to 400°F) and gap capability up to 0.007 in (0.2 mm); adds up to 3,000 PSI holding power.
- Supplied in a 50 ml bottle; fixtures in ~1 hour and full cure in 24 hours; resistant to most automotive and shop chemicals.
High-temperature anaerobic retaining compound for cylindrical metal assemblies; 50 ml bottle, cures in confined metal gaps, -54°C to 204°C operating range.
Product InformationStandard Information- Brand: PERMATEX
- Manufacturer Part Number: 64050
- Country of Origin: United States
- Brand: Permatex
- MPN: 64050
- SKU: PER-64050
- Container Size: 50 ml (1.7 fl oz)
- Volume: 50 ml
- Weight: 0.075 kg
- Cure Type: Anaerobic (cures when confined between metal surfaces in absence of air)
- Gap Capability: Up to 0.007 in (0.2 mm)
- Temperature Range: -54°C to 204°C (-65°F to 400°F)
- Application: Bonding cylindrical metal parts and securing slip- and press-fit cylindrical assemblies (cylinder sleeves, valve guides, bearings, bushings, liners)
- Holding Power: Up to 3,000 PSI
- Fixture Time: Approximately 1 hour
- Full Cure Time: 24 hours
- Chemical Base: Urethane methacrylate
- Specific Gravity: 1.1
- Working Time: 60 minutes
- Storage Requirements: 5 to 25°C
- Resistant To: Most automotive and shop chemicals and solvents
- Shelf Life: 18 months
- Viscosity Range: 500 to 700 cP
- VOC Content (weight %): 2.00%
- Series: 640
- Part Terminology: Retaining Compound
- Chemical Container Type: Bottle
- Primer Required: No
- Recommended Surface Preparation: Yes
- Standards: USA Mil-Spec R-2 Type II
- Country of Origin: United States
Too many requests.