Nema 34 4.5N.m 8.5N.m 12N.m Integrated Closed Loop Stepper Motor 1000 line φ14mm for Sale

Recent Threads

On eBay Now...

Nema 34 4.5N.m 8.5N.m 12N.m Integrated Closed Loop Stepper Motor 1000 line φ14mm For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Nema 34 4.5N.m 8.5N.m 12N.m Integrated Closed Loop Stepper Motor 1000 line φ14mm:
$118.50

Nema 34 4.5N.m 8.5N.m 12N.m Integrated Closed Loop Stepper Motor 1000 line φ14mm

Package included:

1 x Nema34 4.5N.m or 8.5N.m or 12N.m Integrated Closed loop Stepper Motor

100% Brand New and High Quality!!!

4.5Nm:

Package include

1 x Nema34 4.5N.m Integrated Closed loop Stepper Motor

Rated torque4.5N.mMotor size86x86x100mmMotor shaft diameter14mmMotor shaft length30mmInput voltage24-60VDC (recommend 48VDC)Phase current6APhase resistance0.5ΩPhase inductance3.5mHMax. frequency300KHzMoment of inertia1950G.cm²Encoder type1000 lineWorking modepulse+directionWeight2.41KG 5.31LB

Communication function: It is a new motor-driven integrated stepper motor drive system with communication function;
Communication method: TTL;
Communication interface: MicroUSB

TTL MicroUSB Port Function

This port is exclusively designed for initial setup and fine-tuning of motor internal parameters (e.g., current, microstepping, loop gains) using the our debugging software. It does NOT support real-time motion control commands (run/stop/position/speed).

The motor’s standard & industrial-grade real-time control is realized via the Pulse + Direction (PUL+/PUL-/DIR+/DIR-) high-speed signal interface, which is fully compatible with PLC, motion controllers, and microcontrollers.

You can set 400-40000 Microstep through the dip switch

The vector control is designed and produced using an ARM processor with a DSP core, which has the characteristics of low cost, full closed-loop, all digital, low heat generation, low vibration, and fast response.
Including three adjustable feeding back loop controls (position loop, speed loop, and current loop)

The integrated closed-loop stepper motor integrates the closed-loop stepper motor driver into the stepper motor, and the two are integrated,no need to use a separate driver.

8.5Nm:

Package include

1 x Nema34 8.5N.m Integrated Closed loop Stepper Motor

Rated torque8.5N.mMotor size86x86x135mmMotor shaft diameter14mmMotor shaft length30mmInput voltage24-60VDC (recommend 48VDC)Phase current6APhase resistance0.6ΩPhase inductance2.5mHMax. frequency300KHzMoment of inertia2800G.cm²Encoder type1000 lineWorking modepulse+directionWeight3.82KG 8.4LB

You can set 400-40000 Microstep through the dip switch

The vector control is designed and produced using an ARM processor with a DSP core, which has the characteristics of low cost, full closed-loop, all digital, low heat generation, low vibration, and fast response.
Including three adjustable feeding back loop controls (position loop, speed loop, and current loop)

The integrated closed-loop stepper motor integrates the closed-loop stepper motor driver into the stepper motor, and the two are integrated,no need to use a separate driver.

12Nm:

Package include

1 x Nema34 12N.m Integrated Closed loop Stepper Motor

Rated torque12N.mMotor size86x86x176mmMotor shaft diameter14mmMotor shaft length30mmInput voltage24-60VDC (recommend 48VDC)Phase current6APhase resistance0.7ΩPhase inductance3.2mHMax. frequency300KHzMoment of inertia4950G.cm²Encoder type1000 lineWorking modepulse+directionWeight5.55KG 12.23LB

TTL MicroUSB Port Function

You can set 400-40000 Microstep through the dip switch

The vector control is designed and produced using an ARM processor with a DSP core, which has the characteristics of low cost, full closed-loop, all digital, low heat generation, low vibration, and fast response.
Including three adjustable feeding back loop controls (position loop, speed loop, and current loop)

The integrated closed-loop stepper motor integrates the closed-loop stepper motor driver into the stepper motor, and the two are integrated,no need to use a separate driver.

Problem&response Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. We are a new member in now, and need understand both of sides Pls email us before you want to leave any negative response
Refund When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us Welcome worldwide customer inquire and questions, we will try to do our best to response customer’s message within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.