Klutch 1/2 in Drive Air Impact Wrench Composite Twin Hammer TESTED Working for Sale

Recent Threads

On eBay Now...

Klutch 1/2 in Drive Air Impact Wrench Composite Twin Hammer TESTED Working For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Klutch 1/2 in Drive Air Impact Wrench Composite Twin Hammer TESTED Working:
$42.00

Klutch 1/2 inch Drive Air Impact Wrench - pneumatic impact gun with composite housing.TESTED AND WORKING. Run on a compressor and confirmed operational in both forward and reverse.Twin hammer impact mechanism. Lightweight composite housing over a metal hammer case. Rear-mounted power regulator with multiple torque settings, plus one-handed forward/reverse control. Handle exhaust for reduced noise and vibration.Specs for this model line: approximately 980 ft/lbs max reverse torque, 4 CFM air consumption, 1/2 inch square drive with pin-and-ring anvil retention, 1/4 inch NPT air inlet.Condition: Used, and honestly used hard - this came out of a working heavy truck and spring shop and it earned its keep. The hammer case shows heavy scratching through the finish to bare metal, and the rubber grip overmold is worn smooth in the palm area. The factory foil spec label has worn away entirely, which is why no model number is shown.Mechanically it is sound and confirmed running: the 1/2 inch square drive anvil is intact with the retaining pin and ring in place, the power regulator turns through its settings and changes output, and the forward/reverse lever operates. Air inlet threads are clean and undamaged with the intake screen still present.This is a working shop tool, not a collector piece. It looks its age and it runs. Priced accordingly.