DC12V 433MHz 315MHz Wireless Remote Control Switch 4CH Relay Receiver Module for Sale

Recent Threads

On eBay Now...

DC12V 433MHz 315MHz Wireless Remote Control Switch 4CH Relay Receiver Module For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

DC12V 433MHz 315MHz Wireless Remote Control Switch 4CH Relay Receiver Module:
$9.20

12V 433MHz 4-way RC SetProduct parameters:
1. Input voltage: DC 12V
2. Receiving frequency: 433MHz, 315MHz
3. Receiving sensitivity: -108dbm
4. Quiescent current: 5mADescription of receiving terminal:
+V—Power \"positive\" input
GND—power supply \"negative\" input
1—KC1 relay \"normally closed\" terminal
2—KC1 relay \"common\" terminal
3—KC1 relay \"normally open\" terminal
4—KC3 relay \"normally closed\" terminal
5—KC3 relay \"common\" terminal
6—KC3 relay \"normally open\" terminal
7—KC2 relay \"normally closed\" terminal
8—KC2 relay \"common\" terminal
9—KC2 relay \"normally open\" terminal
10—KC4 relay \"normally closed\" terminal
11—KC4 relay \"common\" terminal
12—KC4 relay \"normally open\" terminalOperating instructions and product selling points:
1. Jog function:
Press the code pairing button on the control board once, and the LED indicator flashes once. After the LED indicator lights up, press the remote control button that needs to be paired, and the LED indicator on the control panel flashes 3 times in succession.2. Self-locking function:
Press the code pairing button on the control panel twice in a row, the LED indicator flashes 2 times, and when the LED indicator lights up, press the button on the remote control that needs to be paired, and the LED indicator on the control panel flashes 3 times in succession.3. Interlock function:
Press the code pairing button on the control panel 3 times in a row, the LED indicator flashes 3 times, and when the LED indicator lights up, press the remote control button that needs to be paired, and the LED indicator on the control panel flashes 3 times in succession.4. Two-way jog and two-way self-locking:
Press the code pairing button on the control panel 4 times in a row, the LED indicator flashes 4 times, and when the LED indicator lights up, press the remote control button that needs to be paired, and the LED indicator on the control panel flashes 3 times in succession.5. Two-way jog and two-way interlock:
Press the control panel code pairing button 5 times in a row, the LED indicator flashes 5 times, and when the LED indicator lights up, press the remote control button that needs to be paired, and the control panel LED indicator flashes 3 times in succession.6. Two-way self-locking and two-way interlocking:
Press the code pairing button on the control panel 6 times continuously, the LED indicator flashes 6 times, and when the LED indicator lights up, press the remote control button that needs to be paired, and the LED indicator on the control panel flashes 3 times in succession.7. Two-way interlock and two-way interlock:
Press the code pairing button on the control panel 7 times continuously, the LED indicator flashes 7 times, and when the LED indicator lights up, press the remote control button that needs to be paired, and the LED indicator on the control panel flashes 3 times in succession.8. Code clearing function:
Press the control panel code pairing button 8 times continuously, the LED indicator will flash 8 times, then the LED indicator will automatically flash 8 times continuously, then the code clearing is completed, and all the previously learned remote control key codes will be cleared.Precautions:
1. Do not operate with power on, the power should be turned off to operate, and the power should be turned on after the test is confirmed.
2. When the voltage of the remote control is insufficient, please replace the battery in time (when the voltage of the remote control battery is insufficient, the general remote control distance becomes closer).
3. When using wireless electronic products, you should avoid metal masks, large electronic equipment, strong sources of interference such as electromagnetic fields, etc., to avoid the remote control and the receiving distance being short or unable to work normally.
4. Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product, and in severe cases, it will damage the product and bring hidden dangers to your safety.List:
Type A: 12V 433MHz 4-way with shell*1+mahogany 4-key ABCD*1
Type B: 12V 433MHz 4-way with shell*1+red d4 key ABCD*1
Type C: 12V 433MHz 4-way with shell*1+metal 4-key ABCD*1
Type D: 12V 315MHz 4-way with shell*1+mahogany 4-key ABCD*1
Type E: 12V 315MHz 4-way with shell*1+red d4 key ABCD*1
Type F: 12V 315MHz 4-way with shell*1+metal 4-key ABCD*1
Type G: 12V 315MHz 4-way 4-way intelligent wireless control module relay with shell*1
Type H: 12V 413MHz 4-way 4-way intelligent wireless control module relay with shell*1Type I :220V 433MHz 1CH RelayDescription:
1. Input voltage: AC85V-AC220V
2. RF frequency: 433 MHz
3. RF working mode: Super 315mhz-433.92
4. Receiver sensitivity: -107dBm
5. Remote control distance:> 100 meters (In open environment)
6. Decoding way: MCU software decoding
7. Can store the number of remote control: 16
8. Support remote control type: fixed code, learning code
9th channel: 1CH
10. Multiple working modes: (Jog / Non-Locked, Inter-lock / Latched, Self-lock / Self-Locked)
11. Wiring method: fixed wiring terminal
12. Rated load: 10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
13. Dimension: 5.4 cm * 3.1 cm * 1.4 cm

working / exit way:
1. Jog / Non-latch: Press a button works / UP. release your finger on the same button is stop / off. A need one-button remote control.
2. Self-lock / Self-Latched: Press a button once is working / AUF. Press the same button again is stop / OFF. A need one-button remote control.
3. intersperre / Latched: Press one button to work / press another button is stop / off. One need 2 buttons remote control.

Clear & Learn Code:
1. Clear function - After pressing the \"KEY\" button 8 times, the LED goes off and all the remote control data in the memory. When the LED flashes for 5 times, it indicates that the clear function is complete.
2, learning function - click the learn button \"KEY\", LED indicator light indicates that the microprocessor to enter the learning state of the code, press the appropriate wireless remote control button, LED light flashes 3 times then turn it means code success.
3. LED blinks to determine the selected function.
* flashes 1 time jogging function
* flashes 2 times self-locking function
* 3 times interlock function flashes

Package Included:
1PC*220V 1 channel wireless relay switchType J : 12V 433MHz 1CH Relay

Features:

1. Press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control the indicator flash 2 times and off .it mean you learn it successfully .
2. It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control
3. Remove/clean :press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .

Specification:

1.Input Voltage: DC10-14V
2.Standby Current: ＜5MA
3.RF Frequency: 433MHZ
4.RF Working mode:Super heterodyne receiver
5.Receiver Sensitivity: >90dBm
6.Remote Control Distance: >100 meter(In open environment)
7.Decoding Way: MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type: Fixed code, learning code
10.Channel: 1CH
11.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage: DC12V
14.Output Current: 10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed

1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
4.Delay: Press remote control \'s one button,relay is working,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay

Package Included:

1 x 12V 1 Channel Wireless Relay Switch

Note:

The size is just for reference, there maybe exist a measurement error, please check carefully before you buy it.
Color may vary slightly due to different calibration of each monitor.

Payment must be received in 5 business days of sale closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Shipping

Fill your shipping info

Refund

All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can\'t take a refund.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.