Adapter TL866CS Minipro For Eprom 27C400 27C800 27C160 27C322 Amiga Commodore.
Use of this adapter requires technical Knowlege and a tl866 PROGRAMMER. There are many good videos on youtube about programming with this adapter. If you need to boost your knowledge.
One I found especially helpful from Mark fixes stuff channel is listed below. The last third of the video walks you through the programming.
Making an EPROM Adapter and Burning Amiga Kickstart ROMs - TL866 MiniPro - YouTube
This adapter works with all versions of TL866, TL866II, TL866 PLUS,MiniPro,...
TL866 27C322/160/800/400 EPROM Programming Adapter
This open source adapter, whose description is available for free on Github, converts the pinouts of the EPROMs listed below (which are similar to modern Mask-ROMs in DIP format) to pinout 27C4096, as supported by the TL866/TL866 II series of USB programmers.
The supported EPROMs parts are:
27C400: 40-pin, 4Mbit (256k x 16-bit, 512k x 8-bit)
27C800: 42-pin, 8Mbit (512k x 16-bit, 1M x 8-bit)
27C160: 42-pin, 16Mbit (1M x 16-bit, 2M x 8-bit)
27C322: 42-pin, 32Mbit (2M x 16-bit, no 8-bit access mode)
27C400: program all 512kB in one pass.
27C800: program in 2 (two) 512kB passes.
27C160: program in 4 (four) 512kB passes.
27C322: program in 8 (eight) 512kB passes.
I only ship to the continental US
Good luck and happy offerding!
Popular TutorialsAlarms and Indicator Circuit diagrams