19Pcs Front Wheel Drive FWD Bearing Removal Installation Tool Master Set Service for Sale

Recent Threads

On eBay Now...

19Pcs Front Wheel Drive FWD Bearing Removal Installation Tool Master Set Service For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

19Pcs Front Wheel Drive FWD Bearing Removal Installation Tool Master Set Service:
$82.41

Store
New Arrivals
Add to Favorite
View response
Contact

19Pcs Front Wheel Drive Bearing Removal Installation Service Tool Kit FWD Bearing Install Master Set Wheel Bearing Removal Kit

【APPLICATION】The Front Wheel Drive Bearing Adapter Kit can offer you a fast and effective removal and installation of wheel bearings on front wheel drive vehicles; easily replaces wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle.This eliminates the need for front end alignment after finish the wheel bearing replacement work.
【COMPATIBLITY】: Suitable for most front wheel drive cars, light trucks and vans.
【Drift Size】: 2-3/16\", 2-11/32\", 2-7/16\", 2-9/16, 2-19/32\", 2-13/16\", 2-7/8\", 3-3/32\", 3-5/16\", 3\". 3-13/32\" and 3-19/32\" (55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm)
【MATERIAL】:The Front Wheel Bearing Removal Kit is made of high quality steel and also come with a corrosion and rust resistant black oxide finish.
【PORTABILITY】: Comes with a durable storage case, convenient to collect the tools and transport.

Universal 19 pieces hub & bearing puller

Comprehensive set for the removal and installation of front hub bearings

No dismantle of steering assembly needed

Heavy duty steel drifts

Not compatible for 2011 Honda Accord V6 3.5L Including multiple sizes of drifts, and the kit can be used for different models.

PACKAGE INCLUDES:

1 x Steel Drifts: 38mm;

2 x Drift: 86mm, 91mm;

1 x Receiver Sleeve: 76mm;

3 x Hub Screw: M12 x 1.5 mm;

3 x Hub Screw: M14 x 1.5 mm;

9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm.

Operation as reference:

1. Please check if the vehicle has a trapped rotor or a floating rotor.

2 .Assemble the tool components,then press out the worn bearing.

3. Lightly oil the new bearing and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.

4. Fasten the bearing retainer in right place by using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)

5. Assemble the tool components. Lightly lubricate the hub assembly, and install the hub.

Noted: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.

6. Assemble the remaining vehicle components that were removed for replaces the bearing:

1) lower ball joint to steering knuckle assembly brake rotor.

2) disc brake caliper.

3) outer tie rod nut and tie rod.

4) axle nut.

5) front tires.

If there is any quality problem about the product, please kinldy cntact us.