1/2" 12VDC Hose Barb Electric Solenoid Valve Plastic Body Water 12-volt N/C for Sale

Recent Threads

On eBay Now...

1/2" 12VDC Hose Barb Electric Solenoid Valve Plastic Body Water 12-volt N/C For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1/2" 12VDC Hose Barb Electric Solenoid Valve Plastic Body Water 12-volt N/C:
$13.99

DDB-CS-12VDC

Valves4projects — supplying high quality valves since2004. Over 50,000 valve orders shipped.

EHCOTECH DDB-CS-12VDC SOLENOID VALVE

1/2" HOSE BARBS | 12-Volt DC| Nylon Valve Body / NBR Seal | Normally Closed| 3 - 145 psi

NOTE: This valve is for pressurized systems only. We have agravity feed version of this valve in our store.

General

Great general purpose water valve for manyprojects
2-way, Normally Closed (energize toopen, de-energize to close), unidirectional
Very Fast acting
Can be mounted in any position

Port / Orifice Size

1/2" hose barb inlet / outlet ports(for 1/2" inside diameter hose)
Internal orifice diameter: 8 mm (about 3/8")
Flow rate at 50 psi is >4GPM.

Pressure and Temperature

3 to 145 psi (not for gravity feedsystems)
Max media temp: 175° F (80° C)
For use in pressurized systems only
Note: most low pressure, high volume fountaintype pumps do not work with these types of solenoid valves

Suitable Media

Water
Low viscosity fluids compantible with valvematerials
DO NOT use with fuels

Coil / Electrical

12-Volt DC / 450 mA
Standard 1/4" spade connectors for electricalconnection (connectors available in hardware stores, auto partsstores etc.)
Wires can also also be soldered to theterminals
No polarity requirements (connect positive toone termial and negative to the other)
NOTE: We also carry this valve in 24VDC,24VAC, and 120VAC voltages in our store

Valve Materials