1/2"12VDC Electric Aux Fuel Tank Valve for Trucks Gasoline Diesel 12 Volt DC for Sale

Recent Threads

On eBay Now...

1/2"12VDC Electric Aux Fuel Tank Valve for Trucks Gasoline Diesel 12 Volt DC For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1/2"12VDC Electric Aux Fuel Tank Valve for Trucks Gasoline Diesel 12 Volt DC:
$39.95

EHCOTECH B25V-1/2-CD-12VDC Aux Fuel Tank Valve 1/2" NPT, Normally ClosedUntitled Document

Quality valves from a real company — buy with confidence.Best warranty and parts availability.

Ships within 24 hours from San Diego, CaliforniaMultiple Shipping OptionsFree shipping

General

1/2" NPT inlet and outlet ports

Normally Closed (N/C)

Direct acting valve

1/4" internal orifice

Two 5 mm machine screw holes on bottom for mounting

Coil / Electrical

12-Volt DC (1.2 A)

Epoxy encapsulated coil

DIN connector for easy wiring

Pressure and Temperature

0 to 60 PSI (0 to 4 BAR)

265° F (130° C) Max Media Temp

Valve Materials

Brass body

Stainless Steel Internal Components

FKM (Viton) rubber diaphragm

Suitable Media

Diesel

Dimensions

Height: 3-3/8"

Length: 2-3/4"

Width: 2"

Weight: 1 lb 4 oz

We stock this valve specifically for auxiliary fuel tanks installations although it could be used for low pressure gas applications and many other low pressure and gravity feed applications.

The valve coil is epoxy encapsulated and comes with a DIN connector. Your electrical cable or wires will be run into the connector . The connector has screw-in terminals which make the wiring easy (wiring directions are included with the valve).

The coil is rated for continuous duty, which means that the temperature will stabilize at a safe level and will not continue to rise indefinitely. As with most continuous duty rated valves, the coil may still get warm or even hot during long activation periods. This is completely normal for most solenoid valves.

Pipe thread sizes can be confusing if you are not familiar with the standard. The table below shows the most common NPT (National Pipe Thread) sizes, their equivalent outer thread diameters, and the number of threads per inch (TPI):

Thread SizeOuter Thread DiameterTPI1/8" NPT0.405"271/4" NPT0.540"183/8" NPT0.675"181/2" NPT0.840"143/4" NPT1.050"141" NPT1.315"11.5

We care about our customers. Please contact us if you need any help or tech support!

We carry repair kits and coils for most of our valves. Please contact us for pricing and availability.

FREE shipping is offered on most items via domestic economy shipping.

The Priority Mail option gives a 2 to 3 day delivery time within the contiguous U.S. for a flat rate of $3.99 per order.

See all Domestic and International shipping options and prices under 's "Shipping and Payments" tab.

Our warranty works without hassles. All replacements are quickly shipped from our warehouse in San Diego, California. You are responsible for the cost of shipping the defective item back to us; we gladly cover shipping cost back to you. If time is of essence, make sure to call us first. We understand that down-time can be expensive and we will do our best to work with you.Please note that diaphragms and coils are considered "wear and tear" items and are not typically covered by the warranty.
If you are not happy with our products for any reason, you may return them for a full refund (excluding shipping charges) within 30 days of the purchase.
We work with Original Equipment Manufacturers (OEMs) on regular basis. Please contact us for OEM pricing and/or large quantity discounts.
USE THE STORE CATEGORIES ON THE TOP LEFT SIDE TO FIND OUR OTHER PRODUCTS.

_gsrx_vers_486 (GS 6.5.1 (486))