Electronics Forum

Electronics Circuits & Projects discussion forum. Get help with electronics.


Variable voltage and led

New to electronics? Don't know where to start. No problem! Post your questions here.

Moderator: pebe

Variable voltage and led

Postby Shaam » Sun Mar 06, 2016 5:22 am

Hello,

I want to mount a circuit which switch on different LEDs at different voltages.
For example, lets say I have 3 LEDS and i want them to light up at the voltages below:
5V, 1st LED
8V, 1st and 2nd LEDs
12V,1st, 2nd and 3rd LEDS.

For varying the voltages, i will be using a 10K potentiometer.

I need a simple circuit with basic components. I will be trying this circuit on a breadboard.
Thanks in advance.
Shaam
 
Posts: 1
Joined: Sun Mar 06, 2016 5:09 am

Re: Variable voltage and led

Postby pebe » Mon Mar 07, 2016 5:08 pm

It can be done with comparitors. However, to design a circuit you must state exactly what you want - not just 'for example'.
pebe
 
Posts: 1058
Joined: Tue Dec 09, 2003 11:12 pm
Location: Ellon, Scotland

Re: Variable voltage and led

Postby PradeepKumar » Wed May 11, 2016 5:36 am

Comparators is the right option to go with. Just try using that one to see good results.
PradeepKumar
 
Posts: 48
Joined: Tue Apr 19, 2016 4:48 am
Location: Bangalore


Return to Electronics newbies



Who is online

Users browsing this forum: No registered users and 1 guest

NEW Cartridge 64k Memory 6ES7291-8GF23-0XA0
$39.99
NEW Cartridge 64k Memory 6ES7291-8GF23-0XA0   picture🆕️ *LOT OF 7* Intel D2816 CDIP24 Memory IC ⚡️🇺🇸 SHIP+WARRANTY
$75.0
🆕️ *LOT OF 7* Intel D2816 CDIP24 Memory IC ⚡️🇺🇸 SHIP+WARRANTY  picture🆕️ *QTY 41* TOSHIBA NEC μPB8282C 8936X7002 20 PIN Read Only Memory ⚡️🇺🇸 SHIP
$75.0
🆕️ *QTY 41* TOSHIBA NEC μPB8282C 8936X7002 20 PIN Read Only Memory ⚡️🇺🇸 SHIP  pictureFACIT Tape Reader CNC NC Numerical Control Program Puncher Drive Punch Memory
$99.99
FACIT Tape Reader CNC NC Numerical Control Program Puncher Drive Punch Memory picture


cron