Electronics Forum

Electronics Circuits & Projects discussion forum. Get help with electronics.


Shaft encoders, tachs, madness...

Enquire about part equivalents and difficult-to-find parts here. This is the forum to discuss everything about electronic parts and components.

Moderator: pebe

Shaft encoders, tachs, madness...

Postby billydanger » Fri Apr 10, 2015 5:57 am

I have two motors with 0.5 inch shafts that I need to keep track of and compare during operation. Speed only, not angular position. What would be some likely culprits as far as abandoned equipment that I might be able to salvage something like a rotary encoder or tach?

Thanks in advance,
Billy Danger
billydanger
 
Posts: 1
Joined: Fri Apr 10, 2015 5:50 am

Re: Shaft encoders, tachs, madness...

Postby ramancini8 » Tue Apr 14, 2015 4:08 pm

Look at old printers which use shaft encoders to monitor print head position. You will need/want the associated circuitry.
Look at position control systems such as valve drivers, etc.
ramancini8
 
Posts: 1
Joined: Tue Apr 14, 2015 4:04 pm


Return to Electronic Parts forum



Who is online

Users browsing this forum: No registered users and 3 guests

VINTAGE MACHINE CHAIN BELT GUARD 5 1/2" X 3 7/8" X 2 1/2" SAFETY ORANGE COLORED
$2.0
VINTAGE MACHINE CHAIN BELT GUARD 5 1/2Vintage Jackson Safety Cap Fiberglass Hard Hat Construction Model SC-10 Orange
$25.6
Vintage Jackson Safety Cap Fiberglass Hard Hat Construction Model SC-10 Orange  pictureBurgess Engraver vintage model 74
$10.0
Burgess Engraver vintage model 74 pictureVintage M. Klein & Sons Inc Wire Stripper Crimper Cutter Cat. No. 1000 USA
$7.0
Vintage M. Klein & Sons Inc Wire Stripper Crimper Cutter Cat. No. 1000 USA picture


cron