LJ12A3-4-J/DZ Proximity Switch Metal Sensor AC Two-Wire Normally Closed M12 For Sale
This item has been shown 18 times.
LJ12A3-4-J/DZ Proximity Switch Metal Sensor AC Two-Wire Normally Closed M12:
1. Product introduction:
1>.Name: Proximity switch
3>.Product Type: Buried / Non-buried
4>.Wire length: 1.2m
5>.Induction method: inductive
6>.Shell material: copper nickel plating
7>.Detection object: metal
8>.Detection distance: 4MM
9>.Output current: 400mA
10>.Output form: AC two line normally closed
11>.Working voltage: AC90-250V
2. Product Features:
1>.Proximity switch has the characteristics of travel switch and micro switch, and has sensor performance and reliable operation, stable performance, fast frequency response, strong anti-interference ability, waterproof, shockproof and corrosion resistant.
2>.Head detection surface + heat-resistant ABS, mixed plating material, the appearance is round without burrs, does not hurt the hand, heat resistance.
3>.High quality wire + good electrical conductivity, standard wire is thick, waterproof, oil proof, anti-aging, good electrical conductivity
4>.LED lamp bead + smart chip, when the signal is output, the bead is bright, and the smart chip detects the object sensitively.
5>.Bold cable, strong and durable, the guide coil is made of high quality soft wire material, tensile strength, bending resistance, wear resistance, not easy to break, reliable performance and long service life.
1>.Detecting objects of different materials, the detection distance is different, and attention should be paid during installation;
2>.Installation: Threaded installation, generally affected by temperature, voltage, etc.,is generally installed at 85% of the rated detection distance.
3>.The test surface should be regularly cleaned of metal dust and other deposits to avoid affecting performance;
4>.Ambient temperature: -25°C~+65°C; relative humidity: 35~95%HR;
5>.Vibration: Durability: 10~55Hz complex amplitude 1.5mm, X, Y, Z for 2 hours each;
6>.Impact: Durability: 500m / s (about 50g), X, Y, Z direction 10 times;
7>.For use in strong magnetic fields, shielded wires are recommended.