When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Shipment is SIGNATURE REQUIRED due to loss of items by USPS or THEFT
#1 selling USB upgrade for CNC\'s - ShopLink FLASH
!!!OVER 4000 ShopLink FLASH units SOLD!!!
Rugged, no volatile display or keypad to get broken
Easy, power up, ready to send\eceive
Popular, thousands sold and loved
IF YOU LEAVE YOUR KIND response WITHIN 2 WEEKS OF RECEIPT YOUR
LIMITED WARRANTY ON THE FLASH BOX WILL BE EXTENDED FOR 1 YEAR.
AddUSB FLASH memory to all Haas CNC Machines, connects to RS232
BETTERTHAN afloppy emulator, your floppy remains installed.
ShopLink FLASH is NOT LIMITED to 720K or 1.44MB file sizes like a floppy emulator, our
largest file is \"2 GB\". Incredibly easy to use with unlimited FREE technical assistance.
Everything is included, \"Shoplink Flash 2.0\" box, 30\" CNC cable, 12VDC power
supply, 4GB Flash drive.
$259.00 + shipping. Please email and have your questions answered.
\"ShopLink FLASH\" easy data transfer for CNC controls.
CNC Program Transfer Device, this is what you have been looking for.
Need USB on your CNC for a FLASH memory drive?, here it is.
$259.00 + shipping. Easy, inexpensive and works perfectly.
Missing a com port on your new PC, try \"DNC in a box\".
Drip feed, aka DNC\\TAPE mode, to DynaPath 20\\30, Fanuc, Fadal, Haas, Yasnac MX2\\3
and other CNC\'s. If you are drip feeding with a PC, ShopLink FLASH will work better.Use this small hand held device to connect to your CNC\'s RS232 port and transfer
NC files. ShopLink FLASH lets your CNC receive (READ) or save (PUNCH) files directly
to a USB Flash drive via RS232. Load NC files into your CNC memory OR drip feed files
up to 2 Gigabytes long (using the CNC\'s DNC or Drip\\Spoon feed capability).ShopLink FLASH is a $259.00 Greco minifile replacement, DITCH the diskette.
Read the ShopLinkFlashManual
BEFORE purchase OR email for technical information
the 4 pages of the manual are in the photos area
Read the Quick Start Guide
the QuickStartGuide is in the photos area
NOTE: Foreign buyers, power supply is 100-240VAC 50\\60hz with US style AC plug.14 day return on Factory defects. Returned units will be repaired or exchanged.
This device is robustly tested before shipment. Return shipping paid by buyer.
Typical Haas serial settings for Shoplink FLASH
CHANGING MACHINE PARAMETERS
1. PRESS SETTING/GRAPH KEY.
2. PRESS PAGE DOWN UNTIL RS232 PORTS ARE DISPLAYED ON THE TOP OF THE
SCREEN.
3. USE UP DOWN CURSOR TO HIGHLIGHT PARAMETER TO CHANGE THE LEFT ,
RIGHT ARROW TO CHOOSE OPTIONS, THEN PRESS WRITE KEY TO MAKE PERMANENT.
PARAMETERS
11 BAUD RATE SELECT 9600 (default baud 9600) NOTE higher bauds are supported ie, 19200, 38400, 115200, however start at the default baud
12 PARITY SELECT EVEN
13 STOP BIT 1
14 SYNCHRONIZATION DC CODES (like Xon\\Xoff, but CNC sends Xon when you push \"Receive\")
37 RS-232 DATA BITS 7
Floppy To USB Converter Emulator Kit For HAAS CNC SL10 SL20 TM2 HL2 Mini Mill
$119.99
haas USB FLASH memory upgrade for all CNC Machines, connects RS232. DNC CNC
$178.45
USB Emulator N-Drive Industrial for Haas CNC SL10/20; TM1; TM2; Mini Mill; HL2
$369.00
Popular Tutorials
Alarms and Indicator Circuit diagrams