HL-67N5-8N00P Multi-Function Humidity Device with Temperature Sensor JC For Sale

HL-67N5-8N00P Multi-Function Humidity Device with Temperature Sensor JC

This item has been shown 18 times.

Buy Now

HL-67N5-8N00P Multi-Function Humidity Device with Temperature Sensor JC:

Brand new unused in original boxParts Included • HL-67N5-8N00P • No. 8 x 1 in. Phillips-head sheet metal screw (2) • washer for use with conduit fitting (conduit fitting and nut not provided)
The HL-67x5 Series Multi-function Humidity Device is intended to provide an input to equipment under normal operating conditions. Where failure or malfunction of the HL-67x5 Device could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the control system. Incorporate and maintain other devices, such as supervisory or alarm systems or safety or limit controls, intended to warn of or protect against failure or malfunction of the HL-67x5 Device.
The multi-function humidity device must be configured prior to installation for the following: input and output signals and setpoint and proportional band. The HL-67N5-8N00P has a setpoint potentiometer (adjustable from 60 to 95% Relative Humidity [RH]) and a proportional band potentiometer (adjustable from 5 to 30% RH). Refer to Figure 1 to change the setpoint or proportional band for the application desired
There are no accessories for the HL-67N5-8N00P.
The Johnson Controls TRUERH™ HL-67N5-8N00P is a multi-function device that can function as a high limit or proportional override humidity controller, as stand-alone proportional controller, or a stand-alone two-position controller. As a high limit or proportional override controller, it limits duct humidity by comparing a controller’s request for humidification with the humidity present in a duct. The HL-67N5 proportionately reduces its output signal to the humidification equipment as duct Relative Humidity (RH) approaches a user-defined setpoint. As a result, the HL-67N5 provides more accurate control of duct humidity and reduces condensation. As a stand-alone controller, it can provide a proportional 0 to 10 VDC or 0 to 20 mA output based on its own setpoint, or two-position Single-Pole, Single-Throw (SPST) Normally Open (N.O.) output. The HL-67N5 also includes an integral temperature sensor, which adds to the product's versatility

Buy Now

Popular Tutorials

Alarms and Indicator Circuit diagrams Audio electronic circuits list Circuits for Cars/Motorcycles Computer/PC Hardware Circuits : Design Ideas : Fun/Games Circuits : Signal/Sequence/Misc. Generators : Home/Garden related Circuits : Lights & LED Circuits : Motor Circuits : Music related Circuits : < Oscillator Circuits : Power Supply (PS) Circuit diagrams : Radio,transmitter,receiver circuits : Remote Control Circuit diagrams : Robotics related Circuits : Sensors : Telephone Circuit diagrams : Test & Measurement Circuits :