4Kw ISDB-Tb/DVB-T2/DVB-T ATSC UHF TV televison Transmitter transmisor 4000 watt For Sale

4Kw ISDB-Tb/DVB-T2/DVB-T ATSC UHF TV televison Transmitter  transmisor 4000 watt

This item has been shown 430 times.

Buy Now

4Kw ISDB-Tb/DVB-T2/DVB-T ATSC UHF TV televison Transmitter transmisor 4000 watt:


4Kw Digital DVBT/T2,ATSC,ISDB UHF Transmitter/DMT 10kw 10000 w Analog Pal/NTSC

Item Condition: Used/New

Typical signs of wear such as light scratches on the surface visible throughout the outer housing of the unit.
These are purely cosmetic and do not affect the functionality of this device in any way.
The unit turns on well, is tested and fully functional

DMT/SYES Digital TV Transmitter and Accessories

This Digital TV transmitter UHF Model Multistandard Modulator/Exciter and DMT TVTX-UHF-8M37 Power amplifier suitable for all Digital TV standars.

The transmitter consisting of:
- Telecomponents Modulator/Exciter for all Digital DVB Standards (DVBT/T2, ATSC, ISDB-T)
- Rack-Closet
- N.08 Power amplifier modules;
- Digital High Power Filter out;
- System cooling electrical panel control (Distribution Board);
- Heat Exchanger;
- Hydraulic cental unit;
- Control logic system;
- Digital10 Kw output filter

Technical informations:
- Input signal : ASI Smpt or Mpts, (optional IP and )
- Band : UHF 470-860 Mhz
- Standards: DVB-T, DVB-T2, ATSC, ISDB-Tb
- Output digital power: 3000 - 4000 watt rms
- Output antenna connector: 1 5/8" or 3" EIA Falange
- Power supply: 380/400 V threephases

- Encoder Mpeg/Asi 1 channel Telecomponents =>Ask price
- Encoder Mpeg/Asi 4 channel Telecomponents =>Ask price
- Remote control GSM/TPC-IP =>Ask price
- Antenna connector adapter (from 1 5/8" to 3" Eia Flange) => Ask price
- Analog DMT Pal on NTSC modulator with changeover (for dual cast transmission) =>Ask price
With a good antenna and this transmitter you will have about 300/400Km radius area coverage.

Attention: This transmitter work also on analog techique Pal or NTSC (with analog modulator replace).

Availables all datasheet.

On request we can send our technical staff to perform the installation (worldwide)
If you want can to see and check this transmitter on our Taranto(Italy) laboratories.

We recommend that the equipment installation should be made by qualified technicians. For manuals, datasheet, discount and other information contact us.

For this equipment, we accept payment for installment without interest until 6 month.
The equipment will be shipped to the payment of last installment. Contact us for this solution.
Para este equipo, aceptamos pagos a plazos sin intereses hasta 6 meses.
El equipo se enviará al pago de la última cuota. Contáctenos para esta solución.

Listing Includes:

(1) Digital completer TV Transmitter.

Please take a look at all of the provided photos before placing your offer to thoroughly inspect the lot contents and condition.

Do not trust the improvised merchants!
We have over 1200 positive response 100%
ATTENTION: We do not accept offers by users with less than 5 response.

Transparency and Honesty - Shipping info & Terms

We ship worldwide.
Regarding the shipping cost, before buying the item, always ask how much the cost of shipments.
The shipments costs, in some cases, are incorrect. We try, each time, the courier cheaper, suitable and reliable and faster. The withdrawal of the person merchandise is available by appointment only. The day and the withdrawal time must be agreed in advance.
In general, and unless otherwise agreed with the customer, we use the following shipping methods:
- Shipments to Italy: Couriers land BRT, or GLS, SDA or others (depending on weight and size);
- European Union: Courier via GLS land, BRT, SDA or others;
- Extra European Union: Couriers DHL, FEDEX, UPS by air, others couriers by sea (for large shipments).
The shipping costs are not included in the sale price indicated on the site.
For international non-EU shipments, unless otherwise noted, the following rules apply:
- For airfreight shipment weighing less than or equal 70 kg: direct delivery to the customer's address or at the arrival terminal (airport). In the latter case, the customer must provide for customs clearance, or these formalities will be carried out by Telecomponents at customer expense.
- For shipment by air or sea, with greater than or equal weight 70 kg: delivery at the arrival terminal (cargo port or airport). The customer must provide for customs clearance, or the such transactions will be made Telecomponents at customer expense (See below Import Duties)
The buyer once you bought the item, Telecomponents must provide the correct shipping address in addition to the phone number needed, the days and times of attendance at the place of delivery. This information is necessary to the courier for delivery of the goods.
In some cases, the carrier makes several delivery attempts. If these attempts fail to deliver as a result of the absence of the buyer, and the goods were to return to Telecomponents the buyer, to re-receive the goods purchased, must 're-take the postage.
Our company is not responsible in any way the non-receipt of goods by the customer if this depends on the shipping service. In the event that for any reason your package is lost by the courier, the Telecomponents is willing to undertake 'to try to positively solve the problem and will give quick information to the customer.
In case of damage of the package is received, the Telecomponents is not responsible in any way. However in case the equipment were to be sent packing on delivery partially or completely opened or damaged, you must report it immediately with a note to the courier who delivers, at the same time, take pictures before and after opening it to you ascertain whether the equipment contained is damaged. Through this procedure, you can ask the courier possibility of compensation for damage caused in the shipment.
The shipments are normally made without insurance but, at the customer's request, it is possible to insure the goods. The insurance costs are at customer expense.
In the shipping and handling cost is added to the packing (cardboard box or wooden case).
If the products received do not conform to the above, please let us know and we will do everything possible to resolve the problem satisfactorily.
The product for sale is the one shown in the photos, unless otherwise noted.
If the description and \ or photos are different from the object received, please contact us. We can not solve problems we do not know.
The equipment is always verified and checked before being shipped. Warranty:
For items "Repair & Parts", because they sold as spare parts or not working, there is no warranty.
For used equipment sold as a working, unless explicitly stated otherwise, the warranty is 3 months of purchase.
The warranty period longer than 3 months may 'be required by the purchaser. For new products the warranty is effettive for the period provided the supplier / manufacturer. Payment Method: Return Policy:
Unless otherwise specified, you can always return the products purchased within 15 days of receipt. After this period the product, it can not ', except in justifiable cases and those subsequently described in the following Agreement, be returned.
The cost of returning the item are the responsibility of the buyer. For the return is required RMA (return material authorization) that must 'be required prior to our offices via Email. We want our customers to be happy and satisfied with their purchases and we will work for that. Upon receipt by Telecomponents equipment returned, after verification, successful of conformity 'between the purchased item and the one returned, the buyer will be credited back the amount paid excluding shipping costs. The Articles "Repair & Parts" - are sold so 'as they are and return is possible only if the item you bought does not correspond to what indicated in the description.
Items sold as functional and operational that may be not working on arrival and installation can be returned to Telecomponents.
Since, in general, the equipment sold are high-tech, for the return you must provide proof of the successful installation of the machines, in particular to have complied with all the appropriate procedures to successfully install and to have fulfilled all the parameters and tricks necessary technical (antenna connection, electrical voltages, cooling systems, etc.).
The broken or faulty equipment, there must be returned via a courier hired by Telecomponents that will proceed to the withdrawal of its request. The costs for the withdrawal defective or broken equipment shall be borne by Telecomponents (except as described in the following paragraphs).
If the equipment proves to be defective or broken because of poor installation of return charges will be at the purchaser's charge.
For the restitution it is necessary that the equipment is shipped in the same box, carton or crate used by Telecomponents for sending, paying particular attention to the correct packaging to avoid damage in transportation durations.
Upon arrival at our office equipment is not functioning or defective returns will be subjected to a roadworthiness test of our technicians who will have to ascertain the nature of the technical problem and found the house. If it is established that the technical problem was caused by bad installation, the purchase sum can’t to be refunded. In this case the customer can choose to give up the equipment or to require repair of the same (at your expense). Once repaired the equipment will be returned to the customer who will again bear the cost of shipping incuse, the expenditure referred to in paragraph 1.
If your problem is due to causes not attributable to the customer, the equipment will be repaired and returned to the customer in total expenses of Telecomponents
In general, for products of significant value, in the packaging of the shipment we always attach a USD key containing the photos and a video of the machine while it is in operation as proof of the correct functioning of the equipment.
Duties and Taxes:
Import duties, taxes, fees and shipping costs are not included in the specified sale. These charges are the customer cure. For these costs you will contact the your country customs office before purchase. On international delivery note you can not report values below the actual value of the goods and also mark items as "gifts" or at the cost 0 - Italy and the international regulations prohibit such behavior. At the customer's request, we can provide for us to carry out all customs operations but the customers will still have to bear all costs and expenses of such operations. Responsability:
Our company 'is in no way responsible for any damage to persons or property may occur due to the use of the object purchased. It is assumed, in fact, that electrical and electronic equipment sold are high-tech and can have very high tensions and dangerous work. Acceptance of this agreement:
Buying the item confirms that you have read, understand and agree to be bound by our terms for a foreign sale, and that these requirements are incorporated into the sales terms. Installation and training: The installation of the equipment is provided by the customer. Alternatively, our technical staff can provide for the installation of the equipment on site. The cost of this installation will be calculated based on distance, duration and type of installation. We install worldwide. In case of purchase of particularly complex equipment, as an alternative to our installation by the same, we can provide a short period of training to technical personnel from customer in the our headquarters of Taranto -Italy.

If you have any questions, please ask them before the sale ends. It's often to late to solve them if you wait. Feel free to write/call us via whapptothe number+39_392_9784631 , or send a message to the provided email address. Telecomponents is a Mon-Fri business. We will do out best to answer any questions as soon as we can. (if you contact us on the weekend or after hours you may not hear from us until the next business day). In general, the equipment we sell is all in stock and can be seen and controlled by the customer in our laboratories / warehouses in Taranto-Italy. For high power equipment, if the customer wants to check them, it is necessary to make an appointment to give us time to prepare the machine for testing. If the customer decides to come and visit us for the purchase of equipment, we will organize the stay and guarantee the transfers of / from the airport to our company.

Do not trust the improvised merchants!

Buy Now

Popular Tutorials

Alarms and Indicator Circuit diagrams Audio electronic circuits list Circuits for Cars/Motorcycles Computer/PC Hardware Circuits : Design Ideas : Fun/Games Circuits : Signal/Sequence/Misc. Generators : Home/Garden related Circuits : Lights & LED Circuits : Motor Circuits : Music related Circuits : < Oscillator Circuits : Power Supply (PS) Circuit diagrams : Radio,transmitter,receiver circuits : Remote Control Circuit diagrams : Robotics related Circuits : Sensors : Telephone Circuit diagrams : Test & Measurement Circuits :