122030 Line Impedance and Stabilization Network 50uH/250uH Board LISN Kit for Sale

Recent Threads

On eBay Now...

122030 Line Impedance and Stabilization Network 50uH/250uH Board LISN Kit For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

122030 Line Impedance and Stabilization Network 50uH/250uH Board LISN Kit:
$349.00

122030 Line Impedance and Stabilization Network 50uH/250uH Board LISN Kit.

Voltage rating 270 VAC RMS Line to ground.

Inductors 250uH/50uH.

Designed to meet the measurement requirements for CISPR 16-1-2, ANSI C63.4 conducted emissions.

9kHz to 30MHz frequency range.

Spectrum analyzer monitor port and switch selectable for L1 or L2.

Dimension 6.26" x 8.65" board dimensions.

Printed circuit board is supplied fully assembled and tested. User to provide AC power connectors, Power Switch, fusing, and enclosure as necessary or required.

For safe operation its is recommended that theLISNPrinted Circuit Assembly (PCA) should be placed in a protective EMI tight enclosure. The connection to the ac mains and EUT are shown in the Setup Diagram. Note that the mounting holes are isolated and can be used without additional electrical isolation. Connections to the Power Entry Module and the output Power Receptacle could be made using properly rated AWG #18 insulated wire and 0.187" fast on crimp connectors. The spectrum analyzer is connected to theLISNPCA SMA monitor connector using an appropriate coaxial cable and adapter as required for the spectrum analyzer. A toggle switch is provided to switch the monitor connector from L1 OUT to L2 OUT.