i need some help with my project. i took apart a old computer speaker and removed the amp board. i than used it for my shelf speakers. im not sure how many watts it was pushing but it did push better than just my stereo alone. but im never satisfied with what i got. so i began by changing out the little capacitors that it had in it. and replacing them with the ones from an broken 1000w amp. i think they are a 35v 4700 and two 25v 3300s. and than i changed out the little diodes with much larger ones. after all that it pushes very hard! it burned up my shelf speakers! but they where only 15w each. so i hooked them up to some other speakers, 150w each. and they are loud! but i still cant turn it all the way up. i can only get around 1/2 volume. after1/2 volume it starts to distort. am i just not using big enough speakers? or is there something i did wrong? or is there still something i need to do? ive got access to all the parts i think i will need. i just dont know what i need to do. im dont understand a thing about ohms, volts, or anything else. only watts. and thats an easy one. i just want to know how i get crystal clear sound at full power. and i would like full power to be around 1000w, if not more. i would like to push as much power as i can.
if anyone can give me any advice i would be very thankful!!!!!
thanks to all!!!!!!!