Electronics Forum

Electronics Circuits & Projects discussion forum. Get help with electronics.


question need your opinion

Discuss all your electronics engineering related technical problems and other questions pertaining to design problems in any field of Electrical/Electronics/Computer Hardware

Moderator: pebe

question need your opinion

Postby kenichi » Tue Oct 29, 2013 4:21 pm

picture A - i think the LED will get burn.
picture B- LED wont get burnt.

question : why picture B wont get burn?
can anyone here help explain?
what will happen if the supply voltage in the picture is 220v is it ok to use 0.1ohm resistor?and what if the resistor is 1Mohm , is it ok to use 0.1v as the supply voltage?
Attachments
zsd.png
zsd.png (19.6 KiB) Viewed 19770 times
kenichi
 
Posts: 3
Joined: Tue Oct 29, 2013 4:17 pm

Re: question need your opinion

Postby PradeepKumar » Fri Jun 10, 2016 5:53 am

Picture B is slow because resistors limit the current flowing through the LED.
PradeepKumar
 
Posts: 34
Joined: Tue Apr 19, 2016 4:48 am
Location: Bangalore

Re: question need your opinion

Postby Relayer » Thu Jun 30, 2016 3:25 am

PradeepKumar, why are you answering old posts like this one?
It being 3 years old, do you really expect a reply, let alone the op coming back to the Forum to see if someone has replied?
Also, did you bother reading the rest of his post? Wanting to connect 220V to the circuit? This would be a safety issue and if you had any knowledge you would have warned him not to even contemplate using 220 volts, which I'm certain would be AC.
Sorry mate, but please DON'T answer posts which you're really not sure on, you're only making yourself look like an idiot. :roll:
Relayer
 
Posts: 32
Joined: Sat Sep 12, 2015 12:50 am
Location: Werribee. Australia

Re: question need your opinion

Postby KMoffett » Thu Jun 30, 2016 2:43 pm

Relayer,

Since PradeepKumar joined the forum there is a habit of doing this. If you look at his(?) previous posts, they are mostly replying to old, old posts

Ken
KMoffett
 
Posts: 185
Joined: Sun Apr 13, 2014 3:41 pm
Location: Minnesota USA


Return to EE quiz questions & problems



Who is online

Users browsing this forum: No registered users and 1 guest

HP HSTNS-2111 ProLiant ML350 G4p 5U Server; CPU: TWO Intel Xeon SL7ZD (3.4GHz/80
$270.0
HP HSTNS-2111 ProLiant ML350 G4p 5U Server; CPU: TWO Intel Xeon SL7ZD (3.4GHz/80 pictureDell PowerEdge 860 Pentium Xeon 2.4GHz 8GB RAM 300GB HDD w/SERVER 2003 R2SE
$42.0
Dell PowerEdge 860 Pentium Xeon 2.4GHz 8GB RAM 300GB HDD w/SERVER 2003 R2SE pictureDell PowerEdge R310 Server Intel Xeon 2.93GHz/8M 4GB RAM NO HDD
$210.0
Dell PowerEdge R310 Server Intel Xeon 2.93GHz/8M 4GB RAM NO HDD pictureHP INDIGO Z820 Workstation Dual Xeon E5-2630 2.3GHz 16GB 20000 Digital Press
$3000.0
HP INDIGO  Z820 Workstation Dual Xeon E5-2630 2.3GHz 16GB  20000 Digital Press  picture


cron