Electronics Forum

Electronics Circuits & Projects discussion forum. Get help with electronics.


Current / voltage detection

Enquire about part equivalents and difficult-to-find parts here. This is the forum to discuss everything about electronic parts and components.

Moderator: pebe

Current / voltage detection

Postby kenah » Sat Jan 24, 2015 8:39 am

What would output a digital signal to detecting the presence of voltage / current even if it were to be high?
kenah
 
Posts: 1
Joined: Sat Jan 24, 2015 8:14 am

Re: Current / voltage detection

Postby KMoffett » Wed Feb 18, 2015 2:35 pm

So you want an output to be ~0V when the input voltage or current is either 0V or 0mA? And the output to be +5V when the input voltage or current is "any level" greater than 0V or 0mA? What's the realistic maximum voltage or current? Are you talking AC or DC? And...since it might help us to know...what's the purpose of this project?

Ken
KMoffett
 
Posts: 190
Joined: Sun Apr 13, 2014 3:41 pm
Location: Minnesota USA


Return to Electronic Parts forum



Who is online

Users browsing this forum: No registered users and 1 guest

94ft 12-Wire Underground Telephone Direct Burial Wire/Cable 6-Pair 21 Gauge Wire
$24.95
94ft 12-Wire Underground Telephone Direct Burial Wire/Cable 6-Pair 21 Gauge Wire pictureBelden 9434 Multi 50-Conductor Cable 22 AWG 7x30 Strands TC PVC Ins & Jkt - 25'
$100.0
Belden 9434 Multi 50-Conductor Cable 22 AWG 7x30 Strands TC PVC Ins & Jkt - 25' picture10 Pcs Copper 4 Pole Conductor 2.5mm Solder Plug Jack Adapter Connector UA
$10.15
10 Pcs Copper 4 Pole Conductor 2.5mm Solder Plug Jack Adapter Connector  UA pictureHubbell Dual Lite ATSD Auxiliary Transfer Switch For Use On Fluorescent Fixtures
$10.0
Hubbell Dual Lite ATSD Auxiliary Transfer Switch For Use On Fluorescent Fixtures picture


cron