Electronics Forum

Electronics Circuits & Projects discussion forum. Get help with electronics.


interface to use a pot to control power and other switches

Discuss about electronic circuits here. Request help for circuits that you couldn't find anywhere else, how a circuit works etc. Discuss anything related to electronic circuits.

Moderator: pebe

interface to use a pot to control power and other switches

Postby TerminatorX5 » Mon Nov 18, 2013 7:38 pm

Hello. Newbie here... i hope that someone might be able to point in the right direction...

task at hand:

one box contains a potentiomenter (value from 1.8kOhm jump to 2.4 kOhm and then smooth change to 5.5kOhm)

the other box contains an ON/OFF power switch, and three buttons that select certain program (only one of the three button can be active at a time).

task

build an interface that will keep the second box in OFF state when the pot is at 1.8kOhm, and turn it on when not in 1.8kOhm

while the pot is moving from 2.4kOhm to 5.5kOm, make selection of one switch, then the next switch and then the last switch.

the system is off again, once the pot is back to 1.8kOhm

Question... what can be such an interface?

Please let me know if I need to elaborate more, or clarify the situation further...

thank you
TerminatorX5
 
Posts: 1
Joined: Mon Nov 18, 2013 7:29 pm

Return to Electronic Circuits Help



Who is online

Users browsing this forum: No registered users and 5 guests

112X MICRON MT5C1005-20 250k x 4 DIP Static RAM
$30.0
112X  MICRON  MT5C1005-20   250k x 4   DIP Static RAM pictureAllen Bradley 1775-MR8 CMOS RAM Memory 975066-01
$125.0
Allen Bradley 1775-MR8 CMOS RAM Memory 975066-01 pictureJ2 615 POS System w/ Intel Atom 1.6GHz, 120GB HDD, 2GB Ram Win 7 615 RT
$300.0
J2 615 POS System w/ Intel Atom 1.6GHz, 120GB HDD, 2GB Ram Win 7 615 RT pictureEltee Pulsitron Ram EDM Model TR20
$1300.0
Eltee Pulsitron Ram EDM Model TR20 picture


cron