•  
  •  

Cordless phone backup

Normally the base of a cordless phone has an adaptor and the handset has Ni-Cd cells for its operation. The base unit becomes inoperative in case of power failure. In such conditions, it is better to provide a backup using Ni-Cd cells externally. Here is a simple circuit which can be used with cordless phone SANYO CLT-420 or similar sets.
The working is simple. When AC mains is present, Ni-Cd cells are charged through IC LM317L, which is wired as a current source. Also, diode D3 is reverse-biased, which keeps Ni-Cd cells isolated from positive rail. When AC mains goes off, the Ni-Cd cells provide supply to the cordless phone base unit through diode D3. A green LED is used to indicate the presence of AC mains.
Each Ni-Cd cell costs around Rs 34, and the cost of the backup unit, including the box and cells, would not exceed Rs 300. Hence the circuit is well worth the investment

If there are any problems please contact webmaster@electronic-circuits-diagrams.com

Please share & like

Miller Fluid Power Cylinder Ram mod# AA77RON Bore 2 Stroke 20 8142MO
$25.0 Miller Fluid Power Cylinder Ram mod# AA77RON Bore 2 Stroke 20   8142MO picture
Blacksmith Power Hammer 55 lb Ram built by Chase Saxton Tire Driven
$2950.0 Blacksmith Power Hammer 55 lb Ram built by Chase Saxton Tire Driven  picture
TMM2016P TOSHIBA IC STATIC RAM PDIP24 TUBE 4 PIECES
$12.8 TMM2016P TOSHIBA IC STATIC RAM PDIP24 TUBE 4 PIECES picture
IBM TOSHIBA 4900-786 Wide Intel i3-4330 @ 3.50GHz 12GB RAM Tested
$399.97 IBM TOSHIBA 4900-786 Wide Intel i3-4330 @ 3.50GHz 12GB RAM Tested picture
(1) Cypress CY7C146-25JC 16K 2Kx8 5V 25NS Async Dual Port SRAM 52PLCC STATIC RAM
$3.0 (1) Cypress CY7C146-25JC 16K 2Kx8 5V 25NS Async Dual Port SRAM 52PLCC STATIC RAM picture